Topic: Fuel Line spring clips

[Bear Four]

I'm going to replace my fuel line on my 1973 K2 with original Honda 5.5mm stuff.  I'm assuming the two short pieces that connect  carburetor #1 to #2, and #3 to #4 are the same dimension. Those little pieces use no clips that I can see. I am missing the two wire clip that attach to the petcock. What's the best set up re clamps?

[Johnie]

Yes, dimensions are the same. If you are using the OEM 5.5 most of us use no clips. No leaks...

[ekpent]

 Aren't those two short breather/ connector tubes between 1 and 2 and 3 and 4 a smaller diameter Johnie ?  Same size rubber as the bowl overflow hoses. One of the disadvantages of having my bikes and other junk stored offsite in my shop,can't take a refresher peak.

[beemerbum]

Yes, dimensions are the same. If you are using the OEM 5.5 most of us use no clips. No leaks...

+1 on no clips. With Honda 5.5 line on stock fittings, clips are superfluous

[Johnie]

Eric you are correct. Those breathers are smaller. I thought he was talking about the fuel T's between carbs 1&2 / 3&4. I think the breather tubes are the size of the overflows, but don't quote me.