Author Topic: Somebody was asking about TMR's with MJN  (Read 933 times)

0 Members and 1 Guest are viewing this topic.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
« Last Edit: November 07, 2018, 07:28:23 AM by MRieck »
Owner of the "Million Dollar CB"

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,529
  • Bike almost back to the 70's 2015
Re: Somebody was asking about TMR's with MJN
« Reply #1 on: November 07, 2018, 12:15:40 PM »
I looked for rebuild kit for my TMR32's. MJN needles and what else that needed like emulsion tubes.

I have just found those beautiful MJN 34's when looking at your link to the CR-M31.
Webike has a lot of goodies for our bikes!  ;D Some parts for much more $ than others while they have some other parts not found elsewhere.

I found the long Idle screw kit that I might give them this winter. The std idle screw is PITA to adjust. Easy to bend too...
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967