« previous next »
Pages: [1]   Go Down

Author Topic: Front brake master cylinder sandcast  (Read 375 times)

0 Members and 1 Guest are viewing this topic.

Offline CalleF

  • Full Member
  • *
  • Posts: 9
Front brake master cylinder sandcast
« on: November 04, 2018, 10:47:43 AM »
Hi. I have a very early front brake master cylinder for cb750 69.
The cap/lid is hand made and the cup have no max markings.
What i am toold only the very early sandcast 750 hade this.
What's the valu on this pice?
Logged

Offline Impala

  • Full Member
  • *
  • Posts: 52
Re: Front brake master cylinder sandcast
« Reply #1 on: November 04, 2018, 11:23:14 AM »
Hello, I am building a sandcast back to original. I don't know what early master cylinders would fetch. I would say condition will play a factor also. If you should come to a consensus on a fair price let me know as I could use it. Thanks, Paul. 
Logged

Offline Impala

  • Full Member
  • *
  • Posts: 52
Re: Front brake master cylinder sandcast
« Reply #2 on: November 04, 2018, 11:26:22 AM »
Just noticed you are in Sweden, shipping could be an issue. Thanks, Paul.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,050
Re: Front brake master cylinder sandcast
« Reply #3 on: November 04, 2018, 11:35:57 AM »
If its early it will have an adjuster for the lever. Is the reservoir  lower in height ?
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way
Pages: [1]   Go Up
« previous next »