Topic: Size of screws for mounting oil pump?

[diggidan]

Hi,

I'm going to mount my oil pump back in the sump but I can't find the size of the bolts anywhere.

I assume its M6 but how long should they be?

(And no I don't have the old bolts. I bought the engine and I got the pump on the side).

Thanks guys!

Dan

[bryanj]

Dont know off the top of my head but the parts list should tell you

[diggidan]

Dont know off the top of my head but the parts list should tell you

Thanks! Do you know where to find one? The one i have (heynes) doesnt list those screws.

[Bodi]

Don't rely on a Haynes or Clymer manual. The factory service manual and parts list are downloadable - open the "manuals and technical documents" topic.
You can look at cmsnl.com - they show the size (thread and length plus head type) of the bolts in the parts lookup. You can even buy them there but their prices and shipping costs tend to be high.
For a CB750 they are all 6mm but various lengths and head types.

[seanbarney41]

I don't see where you said what bike?   Beware, if cb750 there are important dowels and o rings as well

[diggidan]

I don't see where you said what bike?   Beware, if cb750 there are important dowels and o rings as well

Sorry, it's a CB750 k4 1974 (I think, based on the serial number).

If you mean the o-rings and dowels that sits between the engine and the pump, I got it. I bought a rebuild kit from Vital Motorparts on eBay after recomendations from this forum and there is said o-rings included.
Unfortenatly I only have one of the dowels but hope to get some made.

[ekpent]

 Think its a 6x35mm with a quanity of 3.

[diggidan]

Think its a 6x35mm with a quanity of 3.

Sweet! Thanks man!