« previous next »
Pages: [1]   Go Down

Author Topic: Offset front sprocket  (Read 793 times)

0 Members and 1 Guest are viewing this topic.

Offline frankie 2 sheds

  • Full Member
  • *
  • Posts: 1
Offset front sprocket
« on: November 14, 2018, 03:21:45 AM »
Hi, I have a cb750 K. I intend to fit an 10mm offset front sprocket striaght onto the drive shaft so I can fit a wider wheel. Before I purchase the sprocket (not cheap) has anyone done it? There is very little room for a standard sprocket let alone an offset one. Will it fit on the drive shaft without having to strip the engine??? Thanks.......Frank
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Offset front sprocket
« Reply #1 on: November 14, 2018, 08:45:45 AM »
What year motor ?
 Use a 77 or 78 750 motor and sprocket will be 10 mm further out.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline tlbranth

  • Master
  • *****
  • Posts: 1,659
Re: Offset front sprocket
« Reply #2 on: November 14, 2018, 08:17:05 PM »
Can't you lace the bigger wheel to the original hub?
Logged
Don't own a Vanagon
Don't work at Boeing
Life is good

1970 CB750 K0
1975 GL1000
1999 GL1500
2002 VT750-CDA ACE - Momma's bike
Terry
Pages: [1]   Go Up
« previous next »