« previous next »
Pages: [1]   Go Down

Author Topic: Wheel off center?  (Read 852 times)

0 Members and 1 Guest are viewing this topic.

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,184
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Wheel off center?
« on: December 15, 2018, 10:40:23 AM »
Is it normal for the rear wheel of a cb650 to be off center by a little bit?  The chain runs true on the sprockets, but the wheel is off-center on the swingarm (about 3/16") and offcenter in the top frame rails of the seat area ( about 1/2").  Is this common?
Logged
intrigued by the wail...seduced by the scream.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Wheel off center?
« Reply #1 on: December 15, 2018, 04:17:34 PM »
Can you run string from the rear to the front and see if they are aligned? I don’t believe they are intentionally off center. What year 650? Is this spoked or mag wheels?
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 16,557
  • Bike almost back to the 70's 2015
Re: Wheel off center?
« Reply #2 on: December 15, 2018, 11:54:30 PM »
Spacers misplaced or wrong type used?
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,884
    • http://forums.sohc4.net/index.php?PHPSESSID=2dd391plra8a2esqfo91d8g3k5&/topic,60973.0.html
Re: Wheel off center?
« Reply #3 on: December 16, 2018, 02:41:59 AM »
the sving arm often bends..its soft(vhy it bend) and can easy be korrekted..easyest to see,if you take a straight piece of vood and hold against the parallel tubes..and have a look from back...
Logged
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,184
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Wheel off center?
« Reply #4 on: December 16, 2018, 06:42:00 AM »
'82 cb650sc,  comstar wheels, which I've had off recently and didn't reinstall properly before trying to measure at the limits of swingarm travel.  My bad...sorry to waste your time!  But thanks for trying to staighten me out. ;D
Logged
intrigued by the wail...seduced by the scream.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Wheel off center?
« Reply #5 on: December 16, 2018, 08:32:35 AM »
Glad to help...?
Logged
Pages: [1]   Go Up
« previous next »