Author Topic: K6 clutch basket query  (Read 104 times)

0 Members and 1 Guest are viewing this topic.

Offline paulreade

  • Full Member
  • *
  • Posts: 15
K6 clutch basket query
« on: January 10, 2019, 08:40:57 am »
Hi guys
I am just about to rebuild my clutch on a k6 and note that the old springs when stripped out were slightly longer than the replacement k6 springs I am going to fit. The replacement springs are the correct length.
There is around 3-5 mm difference.
Can anyone advise why this might be the case, a question was raised have I got a k6 basket fitted in the bike ?, I have no idea, does anyone know how I would identify the basket I have ??????. Is there a sheet available that advises the differences ?
Any input welcome.
Regards
Paul

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 7,155
  • Bike almost back to the 70's 2015
Re: K6 clutch basket query
« Reply #1 on: January 10, 2019, 10:21:19 am »
Can be aftermarket springs, better ones.
My K6 has longer springs, Barnett which are longer than the K6 stock. I have tested harder K6 springs of the shorter lenght. Real pain to use the clutch.
CB750 K6-76 1005cc JMR Billet block.
CB750 K2-75 stock looking project started 2017

 

;