« previous next »
Pages: [1]   Go Down

Author Topic: Tips for making frame ground on fresh powdercoat?  (Read 553 times)

0 Members and 3 Guests are viewing this topic.

Offline paulschell

  • Full Member
  • *
  • Posts: 35
Tips for making frame ground on fresh powdercoat?
« on: February 20, 2019, 02:14:00 PM »
Hey guys,

As the title states - I've had my CB550 frame powder coated (attached picture). I was wondering if there are any good tricks/proven methods you've used for cleaning the powder off of the inside of the top hanger bolt to create a good ground (where the ground goes between the engine spacer and frame) that avoids taking off more material than anticipated?

Thanks in advance!

Paul
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,056
  • I refuse...
Re: Tips for making frame ground on fresh powdercoat?
« Reply #1 on: February 20, 2019, 02:37:53 PM »
A brown ScotchBrite disc on an angle grinder, a razor blade (cut the area carefully) and scrape it with some chemical stripper carefully, a flap disc carefully on an angle grinder...
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Tips for making frame ground on fresh powdercoat?
« Reply #2 on: February 20, 2019, 02:44:36 PM »
dremel
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,430
  • Dr. Bovinestein iBa#80333
Re: Tips for making frame ground on fresh powdercoat?
« Reply #3 on: February 21, 2019, 09:26:04 AM »
+1 razor blades and dremels.

Logged

Offline pjlogue

  • Expert
  • ****
  • Posts: 982
Re: Tips for making frame ground on fresh powdercoat?
« Reply #4 on: February 21, 2019, 11:31:40 AM »
Dremel.  Make sure all contact surfaces are bright metal then coat egerything in silicone vacuum grease and clamp it tight.  The grease will keep the water (and corrosion/rust out) 

-P.
Logged

Offline przjohn

  • Expert
  • ****
  • Posts: 948
Re: Tips for making frame ground on fresh powdercoat?
« Reply #5 on: February 21, 2019, 01:32:17 PM »
I use the Scotchbrite pad on an an angle grinder and it works well.
Logged
I like poetry, long walks on the beach, and poking at dead things with a stick.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,355
  • Central Texas
Re: Tips for making frame ground on fresh powdercoat?
« Reply #6 on: February 21, 2019, 06:35:36 PM »
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........
Pages: [1]   Go Up
« previous next »