« previous next »
Pages: [1]   Go Down

Author Topic: CB750 K4 Carb Boots  (Read 532 times)

0 Members and 1 Guest are viewing this topic.

Offline JeffK

  • Full Member
  • *
  • Posts: 64
CB750 K4 Carb Boots
« on: February 25, 2019, 05:17:13 PM »
I am ready to put my rebuilt carbs back on my 74 CB750 and I noticed that the bent rubber tubes (sorry about the description) are numbered 2 & 4. I have (2) 2's and (2) 4's. Is the 2 just a rotated 3 and the 1 a rotated 4 or do I need to order a new set?

Thanks guys
Logged

Offline 05c50

  • 05c50
  • Expert
  • ****
  • Posts: 755
    • Classic Motorcycle Solution
Re: CB750 K4 Carb Boots
« Reply #1 on: February 25, 2019, 05:36:36 PM »
You got it, only two styles were made.

.......Paul
Logged
Wear a helmet,the life you save may be your own.Ask me how I know.               CB650C,CB550F,GL1000,CB750A

Offline JeffK

  • Full Member
  • *
  • Posts: 64
Re: CB750 K4 Carb Boots
« Reply #2 on: February 25, 2019, 05:46:20 PM »
Thanks Fifty
Logged

Offline evinrude7

  • not a kung-fu
  • Master
  • *****
  • Posts: 2,099
  • something to hüsker
Re: CB750 K4 Carb Boots
« Reply #3 on: February 25, 2019, 07:35:30 PM »
jeff, make sure you have the correct ends in towards the motor or carbs as it may be.  look inside the ends of the carb insulators.  they are different on either side and should match the spigot on the motor and carb sides.
 
Logged
cb750 k6 - ugly
Pages: [1]   Go Up
« previous next »