Baby steps right: just reassembled the countershaft in the transmission. Painstaking making sure gears and circlips are all oriented correctly. I didn’t put assembly lube under the gears. Can I lubricate without disassembly? Or is that not enough?
While we’re on the subject of assembly lube, where and how liberally do I apply: Transmission bearings don’t get any. Do they need a spray? Crankshaft bearings get assembly lube in between the crankshaft and bearing, but not between the bearing and case, right? I had a shop do the valves, so they should be good and lubed, right?