Author Topic: Yamiya products  (Read 1464 times)

0 Members and 1 Guest are viewing this topic.

Offline JDS

  • Full Member
  • *
  • Posts: 44
Yamiya products
« on: March 26, 2019, 05:04:18 PM »
Any comments on dealing with Yamiya? I've been beating myself up looking for a nice set of candy gold side covers for my 750 K1 and I've just checked their prices. For a complete both sides set it looks like the cost to me will be $254. Not bad considering the cost of some of the NOS sets on ebay.

Offline pjlogue

  • Expert
  • ****
  • Posts: 982
Re: Yamiya products
« Reply #1 on: March 26, 2019, 05:25:08 PM »
The side covers I got for my K6 750 were good quality.  I found the service to be good and they answer questions.

-P.

Offline jamesw

  • Hot Shot
  • ***
  • Posts: 323
Re: Yamiya products
« Reply #2 on: March 26, 2019, 05:28:36 PM »
I bought transmission bearings from them last month and wouldn't hesitate to buy again.
72K-F 750 Cafe
75K 750 Cafe
75F 750 Restoration

Offline markreimer

  • Expert
  • ****
  • Posts: 1,192
Re: Yamiya products
« Reply #3 on: March 26, 2019, 05:30:02 PM »
I’ve bought a dozen bits at least from them and it’s always been good. They have some unique products, wouldn’t hesitate to buy!


Sent from my iPhone using Tapatalk

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,355
  • Central Texas
Re: Yamiya products
« Reply #4 on: March 26, 2019, 05:44:03 PM »
Any comments on dealing with Yamiya? I've been beating myself up looking for a nice set of candy gold side covers for my 750 K1 and I've just checked their prices. For a complete both sides set it looks like the cost to me will be $254.

Question is: will the new side covers match your old tank?  I'd consider buying a complete bodywork set so all is new and matching! Isnt your K1 worth it?
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,988
  • 1969 cb750
Re: Yamiya products
« Reply #5 on: March 26, 2019, 06:05:04 PM »
Anythingpurchased has been excellent! High quality side covers.

Offline jaytee-nz

  • Hot Shot
  • ***
  • Posts: 644
Re: Yamiya products
« Reply #6 on: March 26, 2019, 06:27:45 PM »
+5 Good quality and great service.

Offline bek1966

  • Enthusiast
  • **
  • Posts: 126
Re: Yamiya products
« Reply #7 on: March 26, 2019, 07:22:57 PM »
I recently purchased a small order from them and their communication was excellent.  I had trouble with US Customs in Chicago; they ended up sending the package back to Yamiya with no notices to me or Yamiya!  Totally not Yamiya's fault.  Even so, Yamiya was excellent throughout the process and resent my order to me at no additional cost.  Their customer service is excellent.  The products were top notch too.

Brad
1971 CB750 K1 - Candy Gold
1971 CB500 K0 - Star Light Gold
1974 CB350 F1 - Glory Blue Black

Pleasant Prairie, Wisconsin

AwesomeCB

  • Guest
Re: Yamiya products
« Reply #8 on: March 27, 2019, 02:46:32 AM »
I bought a set of K6 side covers and was very happy with the color match and quality of the panel. About $250 shipped. Not bad compared to buying panels and the hassle of having them painted to match.

Offline jakec

  • Master
  • *****
  • Posts: 2,075
Re: Yamiya products
« Reply #9 on: March 27, 2019, 11:02:19 AM »
Yamiya is the best you can get, basically. Their stuff is like Honda quality. I bought 400F sidecovers from them. Their side cover plastic is a little lighter (less dense) than the OEM stuff. They are also not painted on the inside. So if you get candy gold covers they are white unpainted plastic on the inside. Color will be a great match though.

I should clarify actually, I have had a ton of CL175's and those side covers are paper thin. The side covers that came on my 400F were thick and heavy like dinner plates. Maybe they weren't even OEM. The Yamiya covers are somewhere in the middle.
« Last Edit: March 27, 2019, 03:14:48 PM by jakec »
1970 CB750 K0
1977 CB750 Chop
1997 XR650L

AwesomeCB

  • Guest
Re: Yamiya products
« Reply #10 on: March 28, 2019, 10:32:35 AM »
They are also not painted on the inside.

The set I bought is painted inside. K6

Offline Rocky2010

  • Enthusiast
  • **
  • Posts: 244
  • Live in Strayla
Re: Yamiya products
« Reply #11 on: March 31, 2019, 04:42:57 AM »
I have purchased many parts from Yamiya they are great to deal with great service fast delivery and will always answer any questions you have for them they are a recommended dealer in my honest opinion
2010 Harley Fatboy Lo
1972 Honda CB750/4 Under Restoration
1971 Honda CB500/4 Original Condition
1972 Honda CB350/4 Original Condition
1972 Honda XL250 Motorsport Under Restoration
1967 Honda C90 Original Condition
1968 Honda S90
1962 Triumph Speed Twin
1952 Triumph Speed Twin
1970 Bultaco Sherpa T
1971 Bultaco Alpina
1958 Moto Guzzi Zigolo
1970 Moto Guzzi Ambassador Original Cond
1973 Yamaha RD250
1948 Velocette x 2
1942 WLA Harley Davidson
2006 Kawasaki ZX12R (Sold)
1980 Corvette

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,591
  • Gusto mo titi ko?
    • project
Re: Yamiya products
« Reply #12 on: March 31, 2019, 05:55:09 AM »
I have purchased many parts from Yamiya they are great to deal with great service fast delivery and will always answer any questions you have for them they are a recommended dealer in my honest opinion


Are you able to read Japanese? I can’t understand anything on their site.


Sent from my iPhone using Tapatalk

Offline pjlogue

  • Expert
  • ****
  • Posts: 982
Re: Yamiya products
« Reply #13 on: March 31, 2019, 06:41:06 AM »
I have purchased many parts from Yamiya they are great to deal with great service fast delivery and will always answer any questions you have for them they are a recommended dealer in my honest opinion


Are you able to read Japanese? I can’t understand anything on their site.


Sent from my iPhone using Tapatalk

Try here:  https://www.yamiya750.com/  if the parts are not for sale outside of Japan then they don't have any words other than Japanese. 

-P.

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Yamiya products
« Reply #14 on: March 31, 2019, 07:36:26 AM »
Can't let this opportunity go by to say I have been buying from them for over 10 years. Never had a complaint or issue. Products are always top quality. We are lucky to have them. Only wish they were located here in WI :)
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,596
  • Bike almost back to the 70's 2015
Re: Yamiya products
« Reply #15 on: March 31, 2019, 08:47:43 AM »
I have ordered several times from Yamiya.  Many $$$$$...
Always good, perfecly packed and quick shipping.
My Blue avatar bike got tank and side covers from Yamiya.
Some parts are much cheaper here while other parts can cost much more than David Silver, Cmsnl and others.
Do not miss warning decals and maybe charging regulator decals.

Order s complete set, tank and side covers. The Honda badges might cost less elsewhere. Check the others. The tank trim cost way too much at Yamiya.
« Last Edit: April 01, 2019, 12:06:57 AM by PeWe »
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,306
  • Old guy
Re: Yamiya products
« Reply #16 on: March 31, 2019, 10:47:15 AM »
I put a lot of Yamiya stuff on my K3 750. Top notch company, very easy to work with, great quality.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,596
  • Bike almost back to the 70's 2015
Re: Yamiya products
« Reply #17 on: April 01, 2019, 12:10:48 AM »
My K2 build got a refurbished swingarm.  Powder coated. I replaced the shock bushings an installed bearings.

The swingarm I had was found to have a dent where bearing should go in. Checked Yamiya and got a good one less than a week later.
If I should have found an old one on eBay and left it for paint locally, not much less $ wise
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967