« previous next »
Pages: [1]   Go Down

Author Topic: CB750 passenger peg mounting bolts?  (Read 639 times)

0 Members and 1 Guest are viewing this topic.

Offline Tugboat

  • Puppet
  • Master
  • *****
  • Posts: 1,778
  • '75 CB750K + '67 CL90 + '71 CT90
    • PseudoMoto
CB750 passenger peg mounting bolts?
« on: March 29, 2019, 09:57:51 AM »
I have a 4-1 exhaust on my K5 and would like to put the passenger pegs back on. What size bolts do you use? I don't want to buy #90146-300-020 ("pillion step bolt") @ $18/ea. I think they'd be too long anyway?
Logged
If it's worth doing, it's worth doing twice.

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,627
Re: CB750 passenger peg mounting bolts?
« Reply #1 on: March 29, 2019, 10:08:02 AM »
Yes, the pillion bolt would be to long. I would measure the length you need and take the foot peg to the hardware store for size. You will need bolt, lock washer and nut.
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,762
  • Bike almost back to the 70's 2015
Re: CB750 passenger peg mounting bolts?
« Reply #2 on: March 29, 2019, 10:37:48 AM »
M12 x needed lenght.  60mm? Thicknees of frame (hole lenght) + nut + washer + exhaust ear + foot peg
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 10,269
  • 1969 cb750
Re: CB750 passenger peg mounting bolts?
« Reply #3 on: April 01, 2019, 03:58:27 PM »
My son fitted a 4-1 on our K3. Not long ago, I wanted to polish the alloy bracket he made and discovered he just dipped into my race car hardware and used a AN-8 (1/2”xUNF), grade 8 bolt with some matching washers and nylock bolt. It was just the right length and looked great. Might be easier to find what you need, and only you will know!
« Last Edit: April 02, 2019, 05:21:00 AM by BenelliSEI »
Logged

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 10,269
  • 1969 cb750
Re: CB750 passenger peg mounting bolts?
« Reply #4 on: April 01, 2019, 04:00:07 PM »
Sorry....... posted photo and then realized his leg blocks the bracket and h’ware!
Logged
Pages: [1]   Go Up
« previous next »