Topic: CB 400f

[hawaiikid]

Just had my CB 400f bored out 1mm. Do I use a stock gasket or is there somewhere I can order a gasket for a 1mm overbore? i am new to this site.yetrt

[ttr400]

You use the stock gasket, it can accommodate up to 1.0mm overbore.

Kevin

[hawaiikid]

thank you for the information on the cb400f gasket. it is difficult trying to rebuild my bike here in Honolulu. parts bikes are non existant and finding a competant information source locally is impossible. There is only one other cb400f in Honolulu that i know of.

[MauiK3]

Aloha Hawaii kid
Maui is difficult too, I put my K3 together with a lot of parts from all over, lots of shipping costs.
Yamiya 750 has a lot of 400f stuff, it's their other bike they specialize in.
Love to see your 400f if I'm over there.

[hawaiikid]

aloha MauiK3 , my 400f is in rough shape, aim to get it running then work on cosmetics. i have a decent set of carbs but want them rebuilt before trying to start the engine . the carbs are all original with all stock size kiehan jets. I will probably ship them off for rebuild as noone here wants to even look at them. bike has 58,000 miles on it so there is a lot of work to be done.