Author Topic: Interesting read on FCR and TMR carbs  (Read 2289 times)

0 Members and 1 Guest are viewing this topic.


Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,807
Re: Interesting read on FCR and TMR carbs
« Reply #1 on: June 28, 2019, 03:40:07 PM »
Thanks, Mike.............most interesting is that SUDCO is out of stock on RS carbs and both RS & CR-type carbs are in for major price increases............ ;)
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: Interesting read on FCR and TMR carbs
« Reply #2 on: June 28, 2019, 03:54:08 PM »
Thanks, Mike.............most interesting is that SUDCO is out of stock on RS carbs and both RS & CR-type carbs are in for major price increases............ ;)
Your welcome Dennis. The syntax is a little kooky but the pics are nice. I didn't know about the unavailability and price increase of the RS and CR's. Not surprised as they are still very popular.
Owner of the "Million Dollar CB"

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,807
Re: Interesting read on FCR and TMR carbs
« Reply #3 on: June 28, 2019, 06:01:13 PM »
The info comes from Ken at Cycle-X..........
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline CBJoe

  • Master
  • *****
  • Posts: 1,975
Re: Interesting read on FCR and TMR carbs
« Reply #4 on: June 29, 2019, 06:14:25 AM »
The info comes from Ken at Cycle-X..........

I’m super bummed to hear that.  Was just about to buy a set of the RS34s when that news dropped.


Sent from my iPhone using Tapatalk
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)

Online PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,536
  • Bike almost back to the 70's 2015
Re: Interesting read on FCR and TMR carbs
« Reply #5 on: June 29, 2019, 12:26:55 PM »
Interesting read.
I like all info I can get about the TMR carbs.
Luckily no MJN upgrade to order for stock TMR32. $$$ saved ;)
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: Interesting read on FCR and TMR carbs
« Reply #6 on: June 30, 2019, 08:10:29 AM »
The info comes from Ken at Cycle-X..........

I’m super bummed to hear that.  Was just about to buy a set of the RS34s when that news dropped.


Sent from my iPhone using Tapatalk
Yeah.....they are much better than the CR's on your bike
Owner of the "Million Dollar CB"

Online PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,536
  • Bike almost back to the 70's 2015
Re: Interesting read on FCR and TMR carbs
« Reply #7 on: June 30, 2019, 11:10:32 AM »
Strange about price increase for you. USD currency is rather good, right?
Different for us in Sweden where the currency has dropped 20% against the USD the last 2 years, or even more.
Or is it about the Yen only?

TMR32 cost 100 Euro more today than when I bought them feb 2015 for 1399 Euro.
https://www.bikeside.de/MIKUNI-TMR32-Flachschiebervergaser-fuer-alle-CB-750-Four-69-78

RS34 cost 920 Euro at same place. That with 20% VAT
https://www.bikeside.de/MIKUNI-RS34-Flachschiebervergaser-fuer-alle-Z-1-Z-900-A4-Z-1000-A-Z-1000-MKII-Z-1000-Z1R-Z-1000-J-Z-1000-R-GPZ-1100-B1-GPZ-1100-B2-GPZ-1100-UT-GSX-750-GSX-1100-GSX-R-750-GSX-R-1100

999 Euro for these?
https://www.bikeside.de/MIKUNI-RS34-Flachschiebervergaser-fuer-alle-CB-750-F-CB-900-F-CB-1100-F-R

EDIT: The price increase is the new import taxes, right? VAT, customs + eventual fixed handle fee.
« Last Edit: July 01, 2019, 03:06:11 AM by PeWe »
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Interesting read on FCR and TMR carbs
« Reply #8 on: June 30, 2019, 01:24:32 PM »
Thanks Mike
Dont you run the FCR,s on your million dollar CB?
I might have to get one or the other and try them on the GS1100
J
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: Interesting read on FCR and TMR carbs
« Reply #9 on: June 30, 2019, 03:14:24 PM »
Thanks Mike
Dont you run the FCR,s on your million dollar CB?
I might have to get one or the other and try them on the GS1100
J
How are you doing brother? I have RS34's on the CB. I do have a set of 32 TMR and 36 TMR's on the shelf. I will be flow testing them on a George Schuld head this week.
Owner of the "Million Dollar CB"

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,262
  • Humboldt, AZ
Re: Interesting read on FCR and TMR carbs
« Reply #10 on: June 30, 2019, 08:18:15 PM »
Thanks Mike
Dont you run the FCR,s on your million dollar CB?
I might have to get one or the other and try them on the GS1100
J
How are you doing brother? I have RS34's on the CB. I do have a set of 32 TMR and 36 TMR's on the shelf. I will be flow testing them on a George Schuld head this week.
I expect to see a fully documented test result here. It's about time.. 8)
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....