« previous next »
Pages: [1]   Go Down

Author Topic: float post possibility  (Read 754 times)

0 Members and 1 Guest are viewing this topic.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,807
  • Saver of unloved motorcycles.
float post possibility
« on: July 07, 2019, 10:18:15 AM »
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline jgger

  • Master
  • *****
  • Posts: 2,335
Re: float post possibility
« Reply #1 on: July 07, 2019, 12:55:46 PM »
Looks like a glue in set up. Height and alignment would be the challenge. I would think it might be hard to cut  the old piece out very accurately.
Logged
"The SOHC4 uses a computer located about 2-3 ft above the seat.  Those sometimes need additional programming." -stolen from  Two Tired

The difference between an ass kisser and brown noser is merely depth perception.  Stolen from RAFster122s

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,807
  • Saver of unloved motorcycles.
Re: float post possibility
« Reply #2 on: July 07, 2019, 04:31:24 PM »
 I fixed one with a bullet casing once. There is a kit that comes with it, the ad says the part is useless without the kit.
 Cut it smooth, center punch, drill a press fit in a drill press, push it in.
« Last Edit: July 08, 2019, 03:17:37 PM by Don R »
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.
Pages: [1]   Go Up
« previous next »