Author Topic: Chrome 836 Tracy Project! (Sold 04/15/2023). It was fun! (Read 169614 times)

seaweb11 · « **Reply #275 on:** February 11, 2008, 01:34:25 PM »

What am I missing here? I did not take photos when I took off the rotors, but the speedo piece was in there some how. Looking at another single rotor wheel, it seems to need a piece with the corresponding slots to make the speedo rotate. Have I lost a piece?

GoatBaSS · « **Reply #276 on:** February 11, 2008, 02:21:47 PM »

Outside right with tube on bottom. It clicks in and the spacer on the axle keeps it in place. First wheel pic should be it. The spacer on the speedo housing fits inside for it to line up.

seaweb11 · « **Reply #277 on:** February 11, 2008, 02:41:56 PM »

OK, I read that 4 times and get most of it.

It does indeed slip into one side, sorry for the confusion there, but there is nothing there for it to grab hold of to make the inside spin?

I'm including the only photo I have before tearing it down.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #278 on:** February 11, 2008, 03:09:48 PM »

Derek,

Check your email for a front wheel diagram. Much easier for me to send emails than downsize pix and attach here. Which one of the buttons above do you use to add a link to Photobucket?

Jerry

seaweb11 · « **Reply #279 on:** February 11, 2008, 03:14:09 PM »

No button. you just copy the bottom html from your photobucket pic. and paste it where you would normally be typing on the forum box

seaweb11 · « **Reply #280 on:** February 11, 2008, 03:28:24 PM »

RxmanGrif Still looking at pdf you sent.
So am I missing #3? I assume #2 is replaced with my 2nd rotor?

Bob Wessner · « **Reply #281 on:** February 11, 2008, 03:31:46 PM »

Quote from: RxmanGriff on February 11, 2008, 03:09:48 PM

Which one of the buttons above do you use to add a link to Photobucket?

In the reply mode, click on this icon

and insert the photobucket HTML string between the delimiters.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #282 on:** February 11, 2008, 03:59:49 PM »

SOMEWHERE in my garage is a speedo drive assembly. SOMEWHERE! I found my hub at least. I BELIEVE (less than 99.9% sure and other key words are capitalized) the top "tab" on #3 (gear box retainer) fits over the flat spot on the hub and the notched recesses on it's outer "lip" line up inside the speedo gear box #7. EUREKA, well almost. Not giving up. Found the other pieces but the gear box is still MIA. YES!! All the pieces. Disclaimer: both sets I have (on bike 75 750F & spare) are SIMILAR to the picture but #3 does not have the tab that bends toward the hub. They have 2 tabs that fit under and are held in place by the chrome retainer cover #2. ANYWAY, the protruding part of #3 has 2 notches on it that fit over 2 tabs inside the gear box.

Do any of my ramblings make sense>

Bob,
I didn't think us old guys knew this fancy technology as well as you. Thanks. HTML string & delimiters! I'm pretty impressed. Guess I must be the old guy now

seaweb11 · « **Reply #283 on:** February 11, 2008, 04:48:10 PM »

"Do any of my ramblings make sense?"

Not sure? Are you saying I do have something missing and you have the parts?

Terry in Australia · « **Reply #284 on:** February 11, 2008, 04:56:19 PM »

Damn! I can't open photobucket pics from my defence department compuker! And I've got knowledge virtually dripping off me too! Bummer!

mkramer1121 · « **Reply #285 on:** February 11, 2008, 05:37:16 PM »

Derek,

If you can wait until I get home, (oh, 4 hours or so), I can verify how it assembles. I believe, from wheel out to the right side, it goes disc, gearbox retainer (the wings go against the wheel), the silver circular metal piece (cover) that holds it to the wheel (the grooves face inside, lock the retainer down, this has hole for the rotor bolts), the paper washer, then the speedo. See the attached pic:

Jerry Rxman Griffin aka MuthaF'er · « **Reply #286 on:** February 11, 2008, 06:21:51 PM »

Quote from: seaweb11 on February 11, 2008, 04:48:10 PM

"Do any of my ramblings make sense?"

Not sure? Are you saying I do have something missing and you have the parts?

I do not know how a double disc set up works with that or other wheels. Item #3 gear box retainer in the diagram I emailed turns the speedo gearbox. It is not in any of your pictures. I wish I had a spare but do not.

seaweb11 · « **Reply #287 on:** February 11, 2008, 06:53:25 PM »

mkramer1121: so in your diagram I'm missing 8,9 and 11 $:-\$

mkramer1121 · « **Reply #288 on:** February 11, 2008, 08:47:28 PM »

8 is not needed its just a paper seal to keep grease in. I probably have those parts in my garage, I'll need to dig, but if I find them, they are yours, the earliest I can look is Thursday night though. I went w/ a GL front end on mine, using that speedo and such, so I think I still have the 750 ones somewhere.

seaweb11 · « **Reply #289 on:** February 11, 2008, 09:04:08 PM »

Thursday!!!!!!!! That's Outrageous !!!!!

....OK I'll wait. Thanks

..........Man I love this place.

and Terry I hope you caught that drip

mkramer1121 · « **Reply #290 on:** February 11, 2008, 09:13:22 PM »

Well, with class Mon, Tues, Wed and a fulltime job, what do you expect!

Terry in Australia · « **Reply #291 on:** February 11, 2008, 10:12:17 PM »

You still going to pole dancing classes Mike?

mkramer1121 · « **Reply #292 on:** February 12, 2008, 04:55:15 AM »

only for you Terry....

Terry in Australia · « **Reply #293 on:** February 12, 2008, 08:54:33 PM »

Quote from: mkramer1121 on February 12, 2008, 04:55:15 AM

only for you Terry....

Well don't forget to send me the pics!

mkramer1121 · « **Reply #294 on:** February 12, 2008, 09:28:10 PM »

I'm the one on the right...

gotta love Chris Farley RIP

Terry in Australia · « **Reply #295 on:** February 12, 2008, 11:37:54 PM »

Yeah, he was great, just a pity he was dropping acid, and not diet pills.............

754 · « **Reply #296 on:** February 13, 2008, 08:47:39 AM »

That Chis Farley Skit was the best.. I like when Sayze says, I know you should win it you are the best!!

Derek, will send your fork today..^&*&^%$%^& aftermarket fork and its oversize chrome!!. will send exhaust stuff too..

seaweb11 · « **Reply #297 on:** February 22, 2008, 07:52:35 PM »

Had a bit of graphic interface down time. I think I have that sorted now.

Seat came in and I am ecstatic. It is exactly what I wanted. The leather on the corners look grey in the photos but is in fact a perfect match to the cayman skin

Got my bent fork back from 754 and started on a front end mock up. Also received a chrome headlight bucket I bought on line.
I think it looks goofy, unless I add a fairing to this bike, which is a high probability. What do you think?

Just trying on an old fairing.......Cut way down, it may work?

?

fuzzybutt · « **Reply #298 on:** February 22, 2008, 10:01:41 PM »

that does it, i'm going to have to do dual discs on my 74' 750k. bike is looking AMAZING by the way

CrisPDuk · « **Reply #299 on:** February 23, 2008, 03:10:10 AM »

Looking good Seaweb

That seat's definitely a love it or loathe it thing though $:-\$

Painted to match the Tracy body that fairing should look pretty cool

Damn you and your shiny calipers though

I took one look at all those grooves and corners on mine, then chickened out and repainted them, Now the look of yours is making me think maybe I should be getting the paint stripper out

News:

Author Topic: Chrome 836 Tracy Project! (Sold 04/15/2023). It was fun! (Read 169614 times)

fuzzybutt