« previous next »
Pages: [1]   Go Down

Author Topic: starter bearing  (Read 649 times)

0 Members and 1 Guest are viewing this topic.

Offline Dakotarider

  • Enthusiast
  • **
  • Posts: 155
starter bearing
« on: July 17, 2019, 05:10:47 AM »
I am fixing up a 75 cb360T and the starter motor is missing the bearing that goes in the cap for the armature.  I have a 73 cb350f scrap motor that is taking up space on my floor with a good starter in it.  Will the two have the same size bearing in the cap so I can use it?
thanks
Logged
If one bike is good, three is better!

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,981
  • CB500 Number 1000036
Re: starter bearing
« Reply #1 on: July 17, 2019, 07:25:22 AM »
Very good question that i doubt anybody has thought of. You will have to measure them and see
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Dakotarider

  • Enthusiast
  • **
  • Posts: 155
Re: starter bearing
« Reply #2 on: July 17, 2019, 11:37:25 AM »
The answer is yes.  A little heat and gravity/smacking and the bearing dropped right out and into the 360 housing.
Logged
If one bike is good, three is better!
Pages: [1]   Go Up
« previous next »