Author Topic: M-Unit Blue Start Output  (Read 1229 times)

0 Members and 1 Guest are viewing this topic.

Offline CBJoe

  • Master
  • *****
  • Posts: 1,949
M-Unit Blue Start Output
« on: August 06, 2019, 02:49:34 pm »
Probably a silly question, but on the M-Unit Blue it has the dual 15A starter outputs for certain applications where 30A is needed for the starter.  But that isn't needed for our bikes with the separate solenoid.

When Wiring does that mean I only need to connect to a single Starter output on the M-Unit or should I connect to both with a single wire?

Joe
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)

Offline calj737

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 20,781
  • I refuse...
Re: M-Unit Blue Start Output
« Reply #1 on: August 06, 2019, 03:41:40 pm »
Single wire only to the solenoid.
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline CBJoe

  • Master
  • *****
  • Posts: 1,949
Re: M-Unit Blue Start Output
« Reply #2 on: August 06, 2019, 03:55:15 pm »
Single wire only to the solenoid.

Thanks Cal
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)

Offline Nicklopic

  • Hot Shot
  • ***
  • Posts: 332
  • New York
Re: M-Unit Blue Start Output
« Reply #3 on: August 06, 2019, 03:59:57 pm »
So does that mean you can use the M unit outputs directly to the starter and just get rid of the solenoid? 30amps is solid I think to turn over something small like a bike
80' CB650
Build Thread

Offline CBJoe

  • Master
  • *****
  • Posts: 1,949
Re: M-Unit Blue Start Output
« Reply #4 on: August 06, 2019, 05:53:51 pm »
So does that mean you can use the M unit outputs directly to the starter and just get rid of the solenoid? 30amps is solid I think to turn over something small like a bike

No..I do not believe you can get rid of the starter solenoid
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)