« previous next »
Pages: [1]   Go Down

Author Topic: Wiring harness swapability from KO to K2 CB750 - what are the differences?  (Read 556 times)

0 Members and 1 Guest are viewing this topic.

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Wiring harness swapability from KO to K2 CB750 - what are the differences?
« on: August 23, 2019, 05:37:43 AM »
I have a K2 750 with a slightly hacked up harness.  A friend has a K0 harness that looks mainly the same however partzilla shows them as different and incompatible.

Is this just the clutch safety switch and/or signal light warning buzzer that is different between a K0 and K2 harness?

Any show stopping differences wiring wise (like the control switches) between a K0 and K2 harness. 

Appreciate any insight.
Logged

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,282
  • Old guy
Re: Wiring harness swapability from KO to K2 CB750 - what are the differences?
« Reply #1 on: August 23, 2019, 09:18:57 AM »
I am not any sort of expert.
On my K3 I was having issues with my clutch safety switch so I just eliminated it. My harness was a K3 harness from Yamiya. Works well.
If the only issue is the clutch safety switch you may be able to work with it.
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline Keith

  • Hot Shot
  • ***
  • Posts: 360
Re: Wiring harness swapability from KO to K2 CB750 - what are the differences?
« Reply #2 on: August 23, 2019, 04:27:33 PM »
The indicator lights are different, the K2 has a beeper cancel button, there are probably other differences. The K2 has quite s few one year only details.
Logged

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: Wiring harness swapability from KO to K2 CB750 - what are the differences?
« Reply #3 on: August 24, 2019, 06:13:09 AM »
the ko had only one fuse,so there would be diff in the circuits I think,bill
Logged
1978 CB 750K ard and webers
another anfob
Pages: [1]   Go Up
« previous next »