Author Topic: Wits end- 1971 750  (Read 2715 times)

0 Members and 1 Guest are viewing this topic.

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Re: Wits end- 1971 750
« Reply #25 on: August 06, 2019, 07:59:19 AM »
 90% of carb problems are electrical.  ;)
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,849
Re: Wits end- 1971 750
« Reply #26 on: August 06, 2019, 09:36:42 AM »
Is it just me noticing how often “change the plugs” is the solution.......?
NGK used to be the best you could get. Not so much anymore.
most of the folks getting this advice are gonna fowl any plug you give them cuz their carbs and ignition are crap. 
If it works good, it looks good...

Offline maxheadflow

  • Hot Shot
  • ***
  • Posts: 579
Re: Wits end- 1971 750
« Reply #27 on: August 06, 2019, 07:55:24 PM »
90% of carb problems are electrical.  ;)

There is a corollary to that.. 90% of electrical problems are carb.  I used to think I was good at troubleshooting.  Best I got was 40/60 between the 2.

Offline Redline it

  • Hot Shot
  • ***
  • Posts: 561
  • thread killer
Re: Wits end- 1971 750
« Reply #28 on: August 06, 2019, 08:44:31 PM »
Quote from: Honda3 link=topic=178611.msg2072869#msg2072869
[/quote



 
 Did you adjust the valves while the engine was on the wrong stroke? Improper valve adjustment not operating the valves at the correct time?


can that even be possible? forgive me if i'm hijacking this thread, it looks like it turned out well, anyways i know the rockers can be clearanced set to roll over the lobe and have some slack on the tdc comp stroke, but what odd features occur when that happens? i just assembled a top end kind of blind and just picked a random piston 1/4 when it came to the top, and put the c/s on the T mark, set the cam in with #4 on compression stroke, thinking #1 was on compression stroke (#4 cam lobes both were pointing down,) and continued on, and it hit me that there has to be something wrong, besides getting the cam gear and 1/4 pistons at the top of the cylinder in correct time, there's gotta be some upset in the firing order. but i continued and adjusted the valves with each cylinder/valve relationship was giving me this weird feeling, while watching it all turn. but it fired up. so the plugs fire every time they see the piston show up, delivering power to the c/s it couldn't be like 1 4 3 2 or whatever order they power by, it'd be like 4 1 2 3 or 4 3 2 1? not only did it get assembled like a roll of the dice, it very clearly was put with the wrong compression stroke of #4 instead of 1 and figured it'd just get worse to try and start over. i went forward.

Offline Sethpat

  • Full Member
  • *
  • Posts: 11
Re: Wits end- 1971 750
« Reply #29 on: August 27, 2019, 11:22:11 AM »
Does this carb bible come in paperback ?