Author Topic: How's This For A Project Bike? (Read 5492 times)

bill440cars · « **on:** February 01, 2007, 04:36:30 PM »

Not a Honda, but check it out.

http://cgi.ebay.com/ebaymotors/46-Indian-Chief-project-great-basket-case_W0QQitemZ300075686499QQihZ020QQcategoryZ6709QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

medic09 · « **Reply #1 on:** February 01, 2007, 04:41:13 PM »

VERY COOL.

You DID want an Indian, as I recall?

Unfortunately, the 'buy it now' price is more than my car is worth, with my bikes thrown in!

seaweb11 · « **Reply #2 on:** February 01, 2007, 04:55:15 PM »

cool!
Bill you really need to figure out how to download a photo onto your desktop and drop it here

I'm so exhausted clicking that link......foooo, got to go lie down now......

bill440cars · « **Reply #3 on:** February 01, 2007, 05:05:50 PM »

Quote from: medic09 on February 01, 2007, 04:41:13 PM

VERY COOL.

You DID want an Indian, as I recall?

Unfortunately, the 'buy it now' price is more than my car is worth, with my bikes thrown in!

Oh yeah, I'd like to have one and my Dad would have a blast helping me work on it but, and that's a REAL BIG BUT, I'd have to sell everything I own, get rid of my wife and daughter just to try to get it.

Then what would I use for money to buy what ever else I'd need?

It would be cool to have an old Chief to plunk around on now and then.

But, so far, it's going to have to be in my dreams.

Later on, Bill

bill440cars · « **Reply #4 on:** February 01, 2007, 05:15:48 PM »

Quote from: seaweb11 on February 01, 2007, 04:55:15 PM

cool!
Bill you really need to figure out how to download a photo onto your desktop and drop it here

I'm so exhausted clicking that link......foooo, got to go lie down now......

seaweb,

Sorry to tire you out so. My poor OLD pc doesn't have much memory (bout the same as me

)
I need to clear out some space but, I'm not sure where.

About a year ago, I had some problems with ebay, and someone there told me how to periodically clean up some stuff that builds up, to free up some memory or something like that. Problem is I forgot what I was supposed to do. That might give me the space I need. I may just have to wait until I can upgrade to a newer (not new) pc.
Later on, Bill

seaweb11 · « **Reply #5 on:** February 01, 2007, 05:44:42 PM »

yawn.....it's OK, I needed a nap anyway

slept right through DR. Phil

KB02 · « **Reply #6 on:** February 02, 2007, 05:05:04 AM »

here you go, seaweb:

Uncle Ernie · « **Reply #7 on:** February 02, 2007, 06:55:14 AM »

So Bill- how much for the daughter? How are her teeth? Strong back? Would you consider an RD60 as partial payment? Send pix.

I know Red Fred (called that because of his hair, not his politics). Member of the San Francisco Motorcycle Club, one of the oldest clubs in the country. Also one of a group who used to ride their Indians on a very regular basis- Red, Indian Fred, Inky, et al. I'm actually surprised he's letting go of these parts...

ProTeal55 · « **Reply #8 on:** February 02, 2007, 12:01:32 PM »

Thats cool just sitting there !

bill440cars · « **Reply #9 on:** February 02, 2007, 12:53:53 PM »

Quote from: Uncle Ernie on February 02, 2007, 06:55:14 AM

So Bill- how much for the daughter? How are her teeth? Strong back? Would you consider an RD60 as partial payment? Send pix.

I know Red Fred (called that because of his hair, not his politics). Member of the San Francisco Motorcycle Club, one of the oldest clubs in the country. Also one of a group who used to ride their Indians on a very regular basis- Red, Indian Fred, Inky, et al. I'm actually surprised he's letting go of these parts...

You'd have to take her mother too and, take my word for it, you'd PAY me to take them both back!

and I'd have lost a friend forever.

Pretty pricey but, what an investment, if a person could swing it. The value of these just keeps on going up as we speak. I see them now days for anywhere from about $15K to about $20K or more.

Check this deal out. Too expensive for me!!!http://www.kiwi-indian.com/Kiwi%20Replica.htm or this one.
http://www.kiwi-indian.com/Kiwi%20Bobber.htm

clarkjh · « **Reply #10 on:** February 02, 2007, 03:35:27 PM »

Nice erector set, too bad I can't afford it.

James

grumburg · « **Reply #11 on:** February 02, 2007, 04:36:11 PM »

WOW! That bad boy could make $15k disappear faster than Paris Hilton. I like the part "many parts may be for reference only"

Uncle Ernie · « **Reply #12 on:** February 02, 2007, 05:53:20 PM »

Kiwi is the company making Indians again. That bobber is tasty. A friend has the 4 speed tranny and 80 inch engine. Trouble is, the suspension can't really handle it. More than 70 mph on what's essentially a hardtail is nuts.

bill440cars · « **Reply #13 on:** February 02, 2007, 08:11:29 PM »

Quote from: Uncle Ernie on February 02, 2007, 05:53:20 PM

Kiwi is the company making Indians again. That bobber is tasty. A friend has the 4 speed tranny and 80 inch engine. Trouble is, the suspension can't really handle it. More than 70 mph on what's essentially a hardtail is nuts.

You are surely right about the suspension there Uncle. It wasn't the best by any means. I wonder if there were any improvements in the reproduction parts that might help in that area? I do know that there have been some improvements that have been made. Did ya know that there is an OHV top end that you can get and install directly on an old flathead lower end and go with it? I'll find it again and post it.
Later on, Bill

upperlake04 · « **Reply #14 on:** February 02, 2007, 08:57:35 PM »

no big deal Bill - a coupla evenings assembling and a spray bomb or two and.....

bill440cars · « **Reply #15 on:** February 02, 2007, 09:22:54 PM »

Dave, you make it sound so easy.

If only...

The closet I've gotten to having one is to collect diecast ones. I've got a red and black 48' Chief that's a little over a foot long, I've got a deep red one that's about a foot long and a turquoise Indian Four that's about a foot long (I don't remember the actual scale of these) and some misc smaller ones that I picked up. I'd come closer to being able to afford an Indian Warrior, Vertical Twin Scout, Arrow or Brave easier that a Chief, V-Twin Scout and especially an Indian Four! Meanwhile check this one out (I'm not exactly sure how but, I actually managed to post this.

Later on, Bill

bill440cars · « **Reply #16 on:** February 02, 2007, 09:43:42 PM »

I remember seeing one of these at my Grandfather's shop when I was very young.http://cgi.ebay.com/ebaymotors/INDIAN-MOTORCYCLE-BY-BROCKHOUSE-PARATROOPER-SCOOTER_W0QQitemZ320076584054QQihZ011QQcategoryZ6709QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

My Dad had one similar to this one, only many years ago.
http://cgi.ebay.com/ebaymotors/1926-indian-scout_W0QQitemZ230083551822QQihZ013QQcategoryZ6709QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Here's an Indian Arrow

http://cgi.ebay.com/ebaymotors/indian-motorcycle_W0QQitemZ230084491278QQihZ013QQcategoryZ6709QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Later on, Bill

gerhed · « **Reply #17 on:** February 03, 2007, 06:14:46 AM »

Bill,

That baby has your name on it!
You've already got the flywheel balancing tool. right?

This one comes with a lot more parts than mine came with.
Of course mine was a "runner".
But "yours" has a good look to it-My feeling is that it would work without too much trouble.

Phil

bill440cars · « **Reply #18 on:** February 03, 2007, 06:55:51 AM »

If only I could Phil, if only I could.

Thanks for posting that one. It looks like it would be a good project.

Later on, Bill

seaweb11 · « **Reply #19 on:** February 03, 2007, 12:16:04 PM »

Bill, just got up from a nap and what do I see

?

You da man

soon you will be a photshop master

bill440cars · « **Reply #20 on:** February 03, 2007, 12:33:20 PM »

Quote from: seaweb11 on February 03, 2007, 12:16:04 PM

Bill, just got up from a nap and what do I see ?

You da man soon you will be a photshop master

Well thanks, only problem is, I'm not very consistant. Maybe with time and efforts, I can get better. I just gotta keep on trying. I need to learn how to reduce picture sizes too. That would help, in some cases.

Later on, Bill

bill440cars · « **Reply #21 on:** February 03, 2007, 12:53:01 PM »

Phil, didn't mean to sideline your question about the crankshaft truing stand while ago. Yes, I've got it alright. I don't intend to get rid of it.

Later on, Bill

upperlake04 · « **Reply #22 on:** February 03, 2007, 01:12:27 PM »

Bill - all those Indians have a great deal of character, but the models similar to the '46 Chief with the deep streamlined fenders have a style thats timeless. True classic motorcycles. Functional sculpture.
Congrats with the image posting

bill440cars · « **Reply #23 on:** February 03, 2007, 06:27:13 PM »

Quote from: upperlake04 on February 03, 2007, 01:12:27 PM

Bill - all those Indians have a great deal of character, but the models similar to the '46 Chief with the deep streamlined fenders have a style thats timeless. True classic motorcycles. Functional sculpture.
Congrats with the image posting

Yeah, as far as the old Chiefs go, I would prefer the skirted fenders too. Nothing against anyone who changes them , just my preference. I'd take one any way I can get it though.

Dave, you've been a big help to get me to where I can do something in the way of image posting and I appreciate it. I still need to fine tune it though.
Later on, Bill

seaweb11 · « **Reply #24 on:** February 03, 2007, 06:43:24 PM »

Keep hunting Bill.

My experience is that if you go looking for stuff you want but can't afford....eventually it pays off and you find the deal that works for you.

Bought my 40ft boat for $12,000.00 it was listed at $38,000.00
Bought a piece of waterfront listed at $2000,000 got it for $110,000...if you don't go looking you will never run across it

Dream it and it can come true.

News:

Author Topic: How's This For A Project Bike? (Read 5492 times)

upperlake04

upperlake04