testy

Author Topic: Slip on Muffler 75 CB550F? None available why?  (Read 126 times)

0 Members and 1 Guest are viewing this topic.

Offline SuperSport Charlie

  • Full Member
  • *
  • Posts: 5
Slip on Muffler 75 CB550F? None available why?
« on: September 17, 2019, 03:11:09 am »
Is it just me or what? I have looked high and low and can’t find a decent slip on muffler for my CB550F. Headers are ok. Don’t need them. Any input or ideas appreciated. I like the Motowerks style Yoshimura style. I have access to Stainless Steel pipes and can weld. Can I buy universal baffles and make one. Not sure of back PSI needed. Thanks

Online Little_Phil

  • Enthusiast
  • **
  • Posts: 191
Re: Slip on Muffler 75 CB550F? None available why?
« Reply #1 on: September 17, 2019, 09:50:39 am »
Mac make a megaphone style slip on muffler. And I wondered if the Delkevic mufflers (two different styles available) could be made to fit. I/p dia looks similar to the 550F headers dia.

Offline halllzy

  • Full Member
  • *
  • Posts: 55
Re: Slip on Muffler 75 CB550F? None available why?
« Reply #2 on: September 17, 2019, 11:17:59 am »
Is it just me or what? I have looked high and low and can’t find a decent slip on muffler for my CB550F. Headers are ok. Don’t need them. Any input or ideas appreciated. I like the Motowerks style Yoshimura style. I have access to Stainless Steel pipes and can weld. Can I buy universal baffles and make one. Not sure of back PSI needed. Thanks

https://www.coneeng.com/conical_products.html

All offerings pretty customizable



Sent from my iPhone using Tapatalk

Offline Ace Blackwell

  • Hot Shot
  • ***
  • Posts: 266
  • 1977 CB550F - Resurrection in progress
Re: Slip on Muffler 75 CB550F? None available why?
« Reply #3 on: September 17, 2019, 02:55:52 pm »
Cone Engineering can customize or they have a fair amount of pre-made stuff.  They have components if you are looking to build your own.
1977 CB550F Work in Progress

Offline SuperSport Charlie

  • Full Member
  • *
  • Posts: 5
Re: Slip on Muffler 75 CB550F? None available why?
« Reply #4 on: September 17, 2019, 06:23:14 pm »
Thanks for the feedback guys. I tried a piece of S.S pipe today but too. Off by 5 mm. I did see one in Dime City I could retro fit. Still looking.

 

;
Honda