« previous next »
Pages: [1]   Go Down

Author Topic: Sparkplug wire compatibility CB650  (Read 889 times)

0 Members and 1 Guest are viewing this topic.

Offline raiken1

  • Full Member
  • *
  • Posts: 43
Sparkplug wire compatibility CB650
« on: September 20, 2019, 01:51:13 PM »
Is there anything wrong with using these for my 1981 CB650?

https://www.z1enterprises.com/dyna-ignition-wires-7mm-copper-core-black.html
Logged

Offline TurtleSnifferII

  • Enthusiast
  • **
  • Posts: 115
Re: Sparkplug wire compatibility CB650
« Reply #1 on: September 20, 2019, 04:30:21 PM »
I used these ones from 4into1 for my cb650. They work great and stay flexible but those will work just fine.

https://4into1.com/black-spark-plug-wire-7mm-silicon-jacketed/
Logged

Offline TrackT2411

  • Full Member
  • *
  • Posts: 7
Re: Sparkplug wire compatibility CB650
« Reply #2 on: September 20, 2019, 04:31:57 PM »
 Those could be made to work... however, the stock coils have a screw - on type set-up, so the extra 'make your own' caps and crimp rings can't be used. If kind of looks like the spark plug boots are pretty short, too... just saying
Logged

Offline raiken1

  • Full Member
  • *
  • Posts: 43
Re: Sparkplug wire compatibility CB650
« Reply #3 on: September 20, 2019, 09:05:44 PM »
I assume you would just cut them to length and stick the cut end into the coil? No special prep or trimming?

Would the boots being short be an issue?
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,270
  • ... but some animals are more equal than others.
Re: Sparkplug wire compatibility CB650
« Reply #4 on: September 21, 2019, 01:11:10 AM »
Silicon wires is first choice, but... make sure you fit them well to avoid they will move too much in the riding wind. Any specs mentioned on 'suppression'? You don't want suppression in the wires. When suppression varies with length, I wouldn't pick them.
« Last Edit: September 21, 2019, 01:17:39 AM by Deltarider »
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 16,017
  • Bike almost back to the 70's 2015
Re: Sparkplug wire compatibility CB650
« Reply #5 on: September 21, 2019, 02:13:18 AM »
Quote from: raiken1 on September 20, 2019, 01:51:13 PM
Is there anything wrong with using these for my 1981 CB650?

https://www.z1enterprises.com/dyna-ignition-wires-7mm-copper-core-black.html
IF you have Dyna coils with automotive HT lead fittings.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline raiken1

  • Full Member
  • *
  • Posts: 43
Re: Sparkplug wire compatibility CB650
« Reply #6 on: September 21, 2019, 03:14:46 PM »
My coils are original. Would the boots being short cause a problem? Is it better to use the resistor NGK caps with regular plugs or resistor plugs and these caps?
Logged

Offline Bodi

  • Really Old Timer ...
  • *******
  • Posts: 5,710
Re: Sparkplug wire compatibility CB650
« Reply #7 on: September 21, 2019, 07:45:48 PM »
How are you planning to attach the new wires to your original coils?
Logged

Offline raiken1

  • Full Member
  • *
  • Posts: 43
Re: Sparkplug wire compatibility CB650
« Reply #8 on: September 21, 2019, 08:04:10 PM »
As far as I know, you just stick the wire in the coil and tighten down on the threaded caps.
Logged
Pages: [1]   Go Up
« previous next »