Author Topic: Yamaha 2 strokes (Read 2147 times)

emlupi · « **on:** July 15, 2019, 01:57:41 PM »

Here’s a few Yamahas I saw over the weekend at the Falls Village show.

emlupi · « **Reply #1 on:** July 15, 2019, 01:59:07 PM »

A couple more , I don’t know why they post upside down?

ken65 · « **Reply #2 on:** July 15, 2019, 04:08:41 PM »

nice!

brewsky · « **Reply #3 on:** July 16, 2019, 06:20:30 AM »

Very nice!
Always hated getting smoked by a friends YM1 when I had a 305 superhawk!

pmanning · « **Reply #4 on:** July 17, 2019, 07:02:39 AM »

Some of my first attempts at motorcycle wrenching were on a friends used 305 Big Bear scrambler. De-carbonizing the head, fragile electrics, and fruitless attempts to get the oil injection set properly if memory serves me correctly. Yamaha has come a long way since the mid 60s.

Stev-o · « **Reply #5 on:** July 18, 2019, 07:35:34 AM »

Are you using an ipad to post?

Heres my '73 RD350...

emlupi · « **Reply #6 on:** July 18, 2019, 09:48:53 AM »

Nice bike, Steve-O. I posted the pics from my I-phone.

Bankerdanny · « **Reply #7 on:** July 22, 2019, 02:27:48 PM »

My first 'big' bike was a 68 or 69 Yamaha YR2 350 that my dad picked up from a local dealer.

We never got it to run quite right. Dad thought it was a YR2C, but that had scrambler pipes and ours had regular low pipes from the road version.

dugsgms · « **Reply #8 on:** August 19, 2019, 05:42:25 PM »

Here's my 75 RD350, super fun to ride but the clip-ons, solid mountings, high spring rates and lack of seat padding make it only enjoyable in small dosages.

ken65 · « **Reply #9 on:** August 19, 2019, 09:02:52 PM »

Neat looking bike.

emlupi · « **Reply #10 on:** August 20, 2019, 06:12:34 PM »

Here’s another from this past weekend

ken65 · « **Reply #11 on:** August 21, 2019, 04:19:39 AM »

Heres my latest project. Will take ages. No money and currently being sponsored by an african kid.

And the motor . ready to go. rebuilt ,just needs new points and carbs set up.

homemade pipes.

ken65 · « **Reply #12 on:** September 16, 2019, 08:05:46 PM »

bit more progress. nose cone on and tacho mounted.

emlupi · « **Reply #13 on:** September 18, 2019, 07:05:10 AM »

Great looking project ken, keep us posted

02z06dave · « **Reply #14 on:** September 18, 2019, 07:32:49 AM »

I just bought a couple r5 350s. Im thinking about using one of the engines to power my ct70. A 2 stroke 350 powered mini bike could be fun

MauiK3 · « **Reply #15 on:** September 18, 2019, 03:59:09 PM »

Trying to reach orbital velocity?

jgger · « **Reply #16 on:** September 18, 2019, 07:35:33 PM »

That would be a 2 stroke flux capacitor, might take you back to your childhood...........or way past death. It's a crapshoot for sure!

spotty · « **Reply #17 on:** September 18, 2019, 08:24:12 PM »

and then theres this....

https://classic-motorbikes.net/what-wed-like-to-buy-today-350-ypvs-lambretta/

there are other more in depth articles , pics, and videos out there

ken65 · « **Reply #18 on:** October 03, 2019, 02:52:16 AM »

Started this thing up yesty after a couple of months sitting idle.
Started 3rd kick but I think if I left it another few seconds for the fuel to reach the carbies it would have started first kick.
A quick 20 minute ride then some tlc and a detail with in an inch of its life.

Looks much better than my telephone piccy.

emlupi · « **Reply #19 on:** October 03, 2019, 06:24:10 AM »

That sure is a beauty, Ken. Hard to imagine it looking any better than the picture.

ken65 · « **Reply #20 on:** October 03, 2019, 04:30:48 PM »

Thanks emlupi.

What annoyed me was it was covered in tiny black and red dots that I couldn't even see
because i was spray painting nearby. My daughter who's into painting and has eyes that work properly
pointed it out. A couple of hours of gentle cutting got rid of them .
Should have know better.

Sam Green Racing · « **Reply #21 on:** October 11, 2019, 05:05:43 PM »

My 73 RD250.

ken65 · « **Reply #22 on:** October 14, 2019, 05:09:31 PM »

Cool piccy's, thanks.

News:

Author Topic: Yamaha 2 strokes (Read 2147 times)

ken65

ken65

ken65

ken65

ken65

ken65

ken65