« previous next »
Pages: [1]   Go Down

Author Topic: Weldless Frame Kit  (Read 961 times)

0 Members and 1 Guest are viewing this topic.

Offline pdizzle1

  • Full Member
  • *
  • Posts: 3
Weldless Frame Kit
« on: June 22, 2019, 02:33:18 pm »
Hi All,

New member to the forum.  I have a 76 CB750F that has been dormant for a bit and finally getting around to working on it. 

Projects will include:

1) Installing weldless frame kit (how do I get a hold of Scottly?)
2) Addressing oil seepage (not leaking) on cylinder fins.  (replace head gasket?)
3) Replace engine hardware with allen bolts when putting it back together.
4) Upgrade to PAMCO electronic ignition with new coils.
5) fixing pesky carb bowl leak

I welcome any advice or tips on any of the above!!  Haven't worked on bikes very much!!
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Weldless Frame Kit
« Reply #1 on: June 22, 2019, 03:00:47 pm »
Go to for sale section,  I just bumped it up, Thanks.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline mark ward

  • Full Member
  • *
  • Posts: 90
Re: Weldless Frame Kit
« Reply #2 on: October 19, 2019, 11:22:10 pm »
I am looking to buy one of the weldless frame kits. Are any still available?
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Weldless Frame Kit
« Reply #3 on: October 19, 2019, 11:53:21 pm »
 Contact  member  Scottly on here, he should have some kits ready.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline 1976cb750f836

  • Hot Shot
  • ***
  • Posts: 419
  • 76 cb750f, 836, 78 wheels
Re: Weldless Frame Kit
« Reply #4 on: October 20, 2019, 06:59:21 am »
Oil seep, probably the pucks?
Logged

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: Weldless Frame Kit
« Reply #5 on: October 20, 2019, 12:07:49 pm »
Regarding the oil leak, check your tachometer cable where it goes into the cam cover. There is a seal that sometimes needs replacing. I need to do this on mine.
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,670
  • 1969 cb750
Re: Weldless Frame Kit
« Reply #6 on: October 20, 2019, 03:35:13 pm »
And seriously, if it’s just “seeping”, leave it alone! I have a K4 my soon and I have been riding for 5 years. I wipe it down occaisionally, and really clean it once a year. It uses no oil really, just weeps enough to see and runs fine.......
Logged

Offline mark ward

  • Full Member
  • *
  • Posts: 90
Re: Weldless Frame Kit
« Reply #7 on: October 20, 2019, 06:28:32 pm »
thanks for the replies. Finishing up K1 836 rebuild, after receiving my line-bored cases from Cycle X, (with many other parts), and my beauty of a head from Mike Rieck. My MLS head gasket looks almost flush with the oil galley o-rings (which measure 2.4mm thick).
     So, i ordered another set of o-rings, hoping they are 2.5 - 2.6mm; to prevent any potential leaks. I  have not had motor apart for 38 years. But after owning the bike for 44 years, and after reading your posts about the weldless frame kit; i need Scottly to PM me about buying a kit.
Logged

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,242
  • Humboldt, AZ
Re: Weldless Frame Kit
« Reply #8 on: October 20, 2019, 06:50:35 pm »
Hi Mark. Yes, I have kits ready to ship. You need to have 5 posts before we can exchange PMs. One more... ;)
Scott
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline mark ward

  • Full Member
  • *
  • Posts: 90
Re: Weldless Frame Kit
« Reply #9 on: October 20, 2019, 07:00:41 pm »
Cool. Thanks Scott.
Logged

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,242
  • Humboldt, AZ
Re: Weldless Frame Kit
« Reply #10 on: October 20, 2019, 07:24:44 pm »
PM sent
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....
Pages: [1]   Go Up
« previous next »