Author Topic: Marving 4 into 2 exhaust on the 500?  (Read 2105 times)

0 Members and 1 Guest are viewing this topic.

Offline Mikal

  • Full Member
  • *
  • Posts: 38
Marving 4 into 2 exhaust on the 500?
« on: August 22, 2014, 12:46:50 AM »
Hello! My beloved Honda Cb500 four 1972 model is in need of a new exhaust system. My right hand side is fine, as seen in this video:

http://youtu.be/x0Qr0p_w0XQ

The lover left muffler have something loose inside and the upper left muffler has a big hole which has been temporarily mended by an idiot (me).

I think you can hear it in this video actually:

http://youtu.be/92UN-tjmG70

Been looking at the local ebay pages as well as other european ebay sites. DS and CMSNL has also been contacted but the end resault is always the same: New 4 into 4 exhaust is extremely expensive :/

My bike is pretty much stock, Boyer ignition and coils and 100 main jets instead of 78 which was standard in Norway.
I bought the bike for 30 000NOK, about 3000 punds, and there is no way in hell that I'm gonna spend half of that on new exhaust.

I like the vintage look, so I was lookin into the 4 into 2 solution from Marving which can bolt directly on the existing downpipes. Anyone tried these?

http://www.wemoto.com/bikes/honda/cb_500_four_k1_k2/72-73/exhaust
« Last Edit: August 22, 2014, 01:48:51 AM by Mikal »
CB500 four -72
Volvo Duett -65

Offline Trevor from Warragul

  • Expert
  • ****
  • Posts: 1,086
Re: Marving 4 into 2 exhaust on the 500?
« Reply #1 on: August 22, 2014, 03:14:08 AM »
I have a Marving 6-2 on my CBX.  My only complaint is they're too damn quiet!
1971 Kawasaki H1A
1972 Honda CB350F
1976 Moto Morini 3 1/2 Sport
1978 Honda CBX
1997 Suzuki Bandit 1200
1999 Ducati Monster 750

Offline Mikal

  • Full Member
  • *
  • Posts: 38
Re: Marving 4 into 2 exhaust on the 500?
« Reply #2 on: August 22, 2014, 03:29:22 AM »
I have a Marving 6-2 on my CBX.  My only complaint is they're too damn quiet!

is it a deeper sound than stock or is it muted up the revs.. or just plain silent? :)
CB500 four -72
Volvo Duett -65

Offline Trevor from Warragul

  • Expert
  • ****
  • Posts: 1,086
Re: Marving 4 into 2 exhaust on the 500?
« Reply #3 on: August 23, 2014, 06:09:57 AM »
Just plain silent
1971 Kawasaki H1A
1972 Honda CB350F
1976 Moto Morini 3 1/2 Sport
1978 Honda CBX
1997 Suzuki Bandit 1200
1999 Ducati Monster 750

Offline Mikal

  • Full Member
  • *
  • Posts: 38
Re: Marving 4 into 2 exhaust on the 500?
« Reply #4 on: August 24, 2014, 01:09:50 PM »
Thanks! Anyone have tried these 4 - 2 Marvings before? They told me that they bolt straigt on the old downpipes, but will there be some welding as well?
CB500 four -72
Volvo Duett -65

Offline AndyH

  • My religion:-
  • Hot Shot
  • ***
  • Posts: 268
  • Pretty well West of Everywhere in Aus!
Re: Marving 4 into 2 exhaust on the 500?
« Reply #5 on: November 09, 2019, 02:11:47 AM »
This is a way way old thread, but as I'm considering replacing the 4 into 1 on CB500K1 with the Marving 4 into 2 as mentioned above, has there been anyone in the intervening 5 years that's gone down this road??
I have Marving 4 into 2 on Suzuki GS750 and they work well without any jet changes. :)
 
1971 CB750K1 (US import)
1972 CB500 Four K1 (SOLD)
Previously owned..
1967 Honda Sports 90
1971 Yamaha CT2 175
1973 Yamaha RD250
1975 Kawasaki KX125
1983 Yamaha XT250T
BMW R65
BMW R80
BMW R100LT

Offline scott jones

  • Enthusiast
  • **
  • Posts: 163
Re: Marving 4 into 2 exhaust on the 500?
« Reply #6 on: November 09, 2019, 05:03:35 AM »
Good morning Mikal. I have a 1973 cb500. It's stock except for the 4 into 1 exhaust. The previous owner had it put on in 1983. It's made by WINNING. I read somewhere Honda was putting these exhausts on by the 100's to replace the original 4 into 4 exhaust. My carbs & airbox is stock & the bike seems to run very well. I have no issues other than the fact that I really want to get some original pipes like you have & replace the 4 into 1 exhaust only because I like the look of the original exhaust. I'm sorry you are so far away because I would love to have your exhaust if you replace it. I have been on the internet looking at exhaust systems but haven't found anything yet to accommodate my pocketbook. Scott.