Topic: 1979 CM400A Front Brake Switch Connector?

[Maraakate]

Finally got my CM400A running well again, but forgot that a few years some idiot dropped it out in the driveway (not me!) and one of the connectors on the front brake switch broke off and got lost in the dirt abyss.  I replaced the switch.  Where can I get the connector since I know they are small and 90 degrees?  I could directly solder the wires on to the switch, but that's just a bandaid.

The switch in question: https://www.partzilla.com/product/honda/35340-422-013?ref=f6a5360f84b6b17254f9b3d22d90be055f55f52e

[Alan F.]

Perhaps splice this in?

https://www.ebay.com/itm/Brake-Switch-Wire-Front-Stop-Light-Fit-Chinese-Motorcycle-Scooter-Moped-ATV/312605003366?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D20180213162448%26meid%3Dd275ad062ef94917b6efc3039a499a79%26pid%3D100930%26rk%3D1%26rkt%3D12%26sd%3D292136089079%26itm%3D312605003366%26pmt%3D1%26noa%3D1%26pg%3D2332490&_trksid=p2332490.c100930.m5375

[Maraakate]

Yes, that's what I'm going to do.  I was just curious if anyone knew the connector type, size, and was like "oh you can get this connector on amazon, etc".  I forgot I had a few spare kill switch assemblies that have the same connectors so I'm just going to scavenge that since one of them is cruddy looking anyways.