Author Topic: Ok, now I must sell, feelers out. Home Wrecker ??$$  (Read 2136 times)

0 Members and 1 Guest are viewing this topic.

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Ok, now I must sell, feelers out. Home Wrecker ??$$
« on: February 04, 2007, 07:59:27 PM »
I am getting ready to sell this bike. What do you think? This has matching numbers and a clean title.










OTHER TECH INFO:
http://www.anubiscycle.com/custom_cafe_racer.htm
« Last Edit: February 04, 2007, 08:04:57 PM by ElCheapo »
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline nickjtc

  • I was numero dieci
  • Old Timer
  • ******
  • Posts: 4,210
  • Yamaha XT500 'Gromit'
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #1 on: February 04, 2007, 08:47:41 PM »
Ooooh baby, ooooh baby. Love the look of that bike!! Sorry that it has to go. I hope you find someone who will give it a good home.
Nick J. Member #3247

2008 Triumph Tiger 1050
1977 Suzuki GS750

"That which does not kill us reminds us to wear proper motorcycle clothing...."

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #2 on: February 04, 2007, 08:52:56 PM »
Ooooh baby, ooooh baby. Love the look of that bike!! Sorry that it has to go. I hope you find someone who will give it a good home.

I figure I am in the biz to sell them rather than keep them, almost makes me want to cry.  :'(

But there are bills that need to be paid. ;)
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline HITMAN

  • Enthusiast
  • **
  • Posts: 220
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #3 on: February 04, 2007, 09:16:56 PM »
I wish that bike could be added to my collection, but to no avail I must finish mine first.  Do want to thank you for the inspiration though, saw that on you website before.  I am doing very much the same thanks to the cafe kit from Old Bike Barn, but in green and yellow.  Anyway, sad to see your letting her go.


The flag is a bit un-nerving.
1974 Honda CB550F
1984 Honda GL1200A
2003 Honda CBR1100XX

Offline burmashave

  • Forum Immoderator
  • Old Timer
  • ******
  • Posts: 2,876
    • burmashave.net
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #4 on: February 04, 2007, 11:26:00 PM »
I love the look of that bike, EC.  You did an outstanding job.  I hope you get a good price for it.
Quote from: SOHC Digger, RIP
'Ere's whatcha do, Guvna', just throw a couple dookie logs in the hearth and bob's your uncle!
'77 CB750k

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #5 on: February 05, 2007, 09:37:27 AM »
Finally got the guts together and listed it last night. I may have to lower the reserve to sell it. Who knows. We will see how it goes.


http://cgi.ebay.com/ebaymotors/Anubis-Cycles-Home-Wrecker-finally-for-sale_W0QQitemZ150088813719QQihZ005QQcategoryZ80647QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline nickjtc

  • I was numero dieci
  • Old Timer
  • ******
  • Posts: 4,210
  • Yamaha XT500 'Gromit'
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #6 on: February 05, 2007, 10:46:46 AM »
Hey Tom. You're being very brave naming names in the ad!! But then again cruiser types are unlikely to be looking at this bike.
Nick J. Member #3247

2008 Triumph Tiger 1050
1977 Suzuki GS750

"That which does not kill us reminds us to wear proper motorcycle clothing...."

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #7 on: February 05, 2007, 10:49:56 AM »
Hey Tom. You're being very brave naming names in the ad!! But then again cruiser types are unlikely to be looking at this bike.

Crusiers follow, this bike was never meant to follow  ;)
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,493
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #8 on: February 05, 2007, 10:55:34 AM »
wow,66 whole dollars,hang in there tom,i hope it gets better.
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #9 on: February 05, 2007, 11:00:40 AM »
wow,66 whole dollars,hang in there tom,i hope it gets better.

It will get there, that is exactly why there is a reserve.  ;D
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline Uncle Ernie

  • Old Timer
  • ******
  • Posts: 3,613
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #10 on: February 05, 2007, 11:14:04 AM »
Where are you, anyway?
Dude- your 8 layers are showing!

Offline Uncle Ernie

  • Old Timer
  • ******
  • Posts: 3,613
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #11 on: February 05, 2007, 11:14:55 AM »
BTW- what IS the reserve, anyway?
Dude- your 8 layers are showing!

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #12 on: February 05, 2007, 11:21:08 AM »
Reedsburg, Wisconsin

and the reserve means if the bids do not hit the reserve then it does not sell. Keeps me from getting ripped off so to speak ;)
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline Pinhead

  • Master
  • *****
  • Posts: 1,818
  • 1979 CB652-ST
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #13 on: February 05, 2007, 01:05:34 PM »
Is there a $$ value associated with this particular reserve?  :P Can that $$ value be disclosed???

 ;D
Doug

Click --> Cheap Regulator/Rectifier for any of Honda's 3-phase charging systems (all SOHC4's).

GM HEI Ignition Conversion

Quote from: TwoTired
By the way, I'm going for the tinfoil pants...so they can't read my private thoughts.
:D

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #14 on: February 05, 2007, 01:08:11 PM »
Is there a $$ value associated with this particular reserve?  :P Can that $$ value be disclosed???

 ;D

Not right now, but I can tell you I will lower it at the last minute to keep the frenzy on.  ;)
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline Pinhead

  • Master
  • *****
  • Posts: 1,818
  • 1979 CB652-ST
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #15 on: February 05, 2007, 01:12:24 PM »
lol That is a very nice bike, indeed. I'd buy it if I had the cash. But then again, that bike needs no work, and I don't know what I'd do if I owned a vehicle that I didn't have to work on!
Doug

Click --> Cheap Regulator/Rectifier for any of Honda's 3-phase charging systems (all SOHC4's).

GM HEI Ignition Conversion

Quote from: TwoTired
By the way, I'm going for the tinfoil pants...so they can't read my private thoughts.
:D

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #16 on: February 05, 2007, 01:21:36 PM »
lol That is a very nice bike, indeed. I'd buy it if I had the cash. But then again, that bike needs no work, and I don't know what I'd do if I owned a vehicle that I didn't have to work on!

There is always some work to do.  ;)
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #17 on: February 05, 2007, 04:22:42 PM »
after a weekend of hard work on some homework i thought i'd play on the internet and what did i see... HOMEWRECKER!

thought i'd take a stab at the reserve and still came up short.  i do still have high bid at the moment though  ;D

i hope someone from the forum gets it... it seems appropriate for some reason.
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Uncle Ernie

  • Old Timer
  • ******
  • Posts: 3,613
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #18 on: February 05, 2007, 04:51:21 PM »
Got dang it Cheapwad- we're trying to give you a hard time because of what your copy says and you're not playing along.  I'm supposed to be banned from bidding now, aren't I ?
Dude- your 8 layers are showing!

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #19 on: February 05, 2007, 07:03:12 PM »
I dont get riled up anymore because I do not get paid for it.  ;D
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline Uncle Ernie

  • Old Timer
  • ******
  • Posts: 3,613
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #20 on: February 05, 2007, 07:17:15 PM »
Creepy. It looks like W is saying that to me...
Dude- your 8 layers are showing!

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: Ok, now I must sell, feelers out. Home Wrecker ??$$
« Reply #21 on: February 05, 2007, 07:20:33 PM »
Creepy. It looks like W is saying that to me...

If I was not creepy I would not be normal  ;D
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.