found these 2 coils for 400f that looked like they were in direct sunlight for 30 yrs, from the thick layer of oxidized plastic. scraped that off to find some part or voltage numbers. #s 2 and 3 coil plug wires were both broken in the last 2 inches from the plug cap ends. like floppy broken except for the core wire is all that held those last 2 inches. i screwed on the 1 known good set of 43 year old plug caps even on the 2 broken ends and because of the position of the cracks and angles to the plugs the wires make a squared 90' or more angle when fitted. with reluctance saying it's probably not gonna work or even if it was even gonna fire, it fired up and hasn't missed a spark since. it was minutes away from getting the wires cut off and drilled out to be fitted with today's junk quality spark plug wire parts. collecting junk and holding onto it sometimes pays off.