Author Topic: Base Line jet sizes with Velocity stacks??  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

Offline 78cbfun

  • Full Member
  • *
  • Posts: 38
Base Line jet sizes with Velocity stacks??
« on: January 21, 2020, 07:08:44 AM »
Has anyone ran velocity stacks coupled with a shorty muffler? If so what jet sizes did you go with for basline. My bike is a 78 cb550.  I currently have pods with the shorty muffler. 95 main with 42 slow. 

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,616
Re: Base Line jet sizes with Velocity stacks??
« Reply #1 on: January 21, 2020, 02:21:05 PM »
I would do 105 mains (maybe 110 if you feel more power at wide open throttle with the choke slightly applied)

Stock pilots

Raise the needle one notch from stock position (meaning lower the clip)

That should get you pretty good. If I were you Iā€™d try and find a local dyno. A guy by me charges around $50 for three pulls.