« previous next »
Pages: [1]   Go Down

Author Topic: Rubber washer between front fork covers and headlight bucket  (Read 599 times)

0 Members and 1 Guest are viewing this topic.

Offline neudl

  • Enthusiast
  • **
  • Posts: 183
Rubber washer between front fork covers and headlight bucket
« on: February 28, 2020, 10:55:14 am »
1977 CB550K. I pulled off the headlight bucket for repainting, and these washers are cracked and work out. They are essentially cushions between the fork cover and the headlight housing. I cannot find them on parts diagrams. Anyone know of a source?
« Last Edit: February 28, 2020, 12:38:49 pm by neudl »
Logged

Offline lash

  • Hot Shot
  • ***
  • Posts: 729
Re: Rubber washer between front fork covers and headlight bucket
« Reply #1 on: February 28, 2020, 02:11:21 pm »
Plumbing section of anyhardware store ! ;D
Logged
Analog mind in a digital world..

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,470
Re: Rubber washer between front fork covers and headlight bucket
« Reply #2 on: February 28, 2020, 04:08:37 pm »
If they are the same as a 750,I believe vintagecb750.com has them.

Sent from my LM-X420 using Tapatalk

Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,653
  • 1969 cb750
Re: Rubber washer between front fork covers and headlight bucket
« Reply #3 on: February 28, 2020, 04:15:29 pm »
Look for the correct parts. The top ones have a a centring ring. The bottom ones are tapered and have cutouts to allow moisture to escape......
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,498
  • Bike almost back to the 70's 2015
Re: Rubber washer between front fork covers and headlight bucket
« Reply #4 on: February 28, 2020, 10:34:11 pm »
The tapered rubber ring is not to be mounted as I thought. Important to verify with parts chart. I do not remember now, I doublechecked and checked again.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Jeff10

  • Full Member
  • *
  • Posts: 7
Re: Rubber washer between front fork covers and headlight bucket
« Reply #5 on: March 01, 2020, 10:06:30 pm »
The ones for the 71 - 76 750s are available from Yamiya750.com, #L095  and PartsnMore, #73-0936
Logged
Pages: [1]   Go Up
« previous next »