Author Topic: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.  (Read 1713 times)

0 Members and 1 Guest are viewing this topic.

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Went down to this show.

It was complete waste of time.

Boobie girls were a joke. Like a cabage wrapped in a rubber band.  ;)

ONLY HARDLEY FURGEUSON and MASEY DAVIDSON.

POS of a show. They showed only completely unrideable bikes, which are worthless. I figure if it does not corner worth a shyte, then it is worthless - no matter how cool it may look.
« Last Edit: February 03, 2007, 07:55:57 PM by ElCheapo »
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #1 on: February 03, 2007, 08:04:36 PM »
Boobie girls were a joke. Like a cabage wrapped in a rubber band.  ;)

When my wife and I went to the MI show, she said how she was tempted to ask one of them, "Aren't you kinda old to be dressed like that?"



"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #2 on: February 03, 2007, 08:10:03 PM »
Whats more....$16 to freakin park!
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline aptech77

  • Expert
  • ****
  • Posts: 850
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #3 on: February 03, 2007, 08:12:28 PM »
You need to go to the Cycle World show next week........

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #4 on: February 03, 2007, 08:13:23 PM »
You need to go to the Cycle World show next week........

I would but I am hard pressed to make any kind of drive to anywhere right now for a show.
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #5 on: February 03, 2007, 08:13:58 PM »
Wasn't as bad here (price wise).  I love how they said, "FREE MOTORCYCLE PARKING!!"

In January right in the middle of winter. RIGHT....  :-\

Was this the Cycle World show, or a different one? (We hit the Cycle World one)
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #6 on: February 03, 2007, 08:15:11 PM »
Wasn't as bad here (price wise).  I love how they said, "FREE MOTORCYCLE PARKING!!"

In January right in the middle of winter. RIGHT....  :-\

Was this the Cycle World show, or a different one? (We hit the Cycle World one)

Different show. I think the Cycle World show is in the same place in 2 weeks.
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline aptech77

  • Expert
  • ****
  • Posts: 850
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #7 on: February 03, 2007, 08:15:46 PM »
No its in Rosemont

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #8 on: February 03, 2007, 08:18:29 PM »
No its in Rosemont


Ok, But I still refuse to do the drive again. It was almost 4 hours in BS weather this morning at 3:00AM. I just really dislike looking at hundreds of booths of tractor parts, pawing through a crowd that likes what they are told to after several hours of driving.  8) ;)
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline aptech77

  • Expert
  • ****
  • Posts: 850
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #9 on: February 03, 2007, 08:20:45 PM »
I will drive..... ;)

Serenity

  • Guest
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #10 on: February 03, 2007, 08:39:00 PM »
Im still trying to figure out what a cabbage in a rubber band looks like..does that mean they were basically naked?


Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #12 on: February 04, 2007, 01:01:24 AM »
I too have seen this in most shows I have gone to. It is quite depressing.
Truth be told, they are organized and we are not .

If enough vintage owners, "we need to make clubs"  get together, and show up, it would be more inviting to others who think the way we do and a show would take on a different look and feel.

This I believe to be the truth.



Offline toycollector10

  • Expert
  • ****
  • Posts: 1,134
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #13 on: February 04, 2007, 01:38:29 AM »
Yeah, bloody terrible aren't they. Did you see my post where I foolishly sent an application to a mob here to show my bike and they sent back my entry and cheque with a scribbled note, something about, "we don't have a section for Japanese motorcycles"

Then I saw a notice posted up in the local H.D. dealers for some sort of organised ride. Big text on the bottom of the flier read "NO JAPPERS"

They are just a pack of bloody losers if you ask me.
1969  CB 750 K0
1973  CB175
1973  Z1 Kawasaki

Offline gerhed

  • Master
  • *****
  • Posts: 1,801
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #14 on: February 04, 2007, 07:25:31 AM »
I did get into a Cycle World Cycle Show--Local bikes had an area at the back of the hall.
They probably couldn't tell what it was--can you?
Rides: 75 CB750F, 48 Indian Chief, 67 Triumph TR6, 63Honda CA95
          83 XL600R in CB360 Frame
          3-wheel electric tilting cycle

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #15 on: February 04, 2007, 02:18:54 PM »
They probably couldn't tell what it was--can you?

It looks like the offspring when a car mates with a CB360... ;D ;)
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #16 on: February 04, 2007, 08:19:33 PM »
Im still trying to figure out what a cabbage in a rubber band looks like..does that mean they were basically naked?

For the most part. And I can say it was not for the better. Young, yes, but they wore clothes too tight and too small for any woman of any age.  :-X
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline ProTeal55

  • Old Timer
  • ******
  • Posts: 4,887
  • Est1968.com
    • Joe's Barbershop Chicago
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #17 on: February 05, 2007, 11:20:50 AM »
I wish I knew you were going Tom, I would of warned you NOT TOO..
I used to "work" that show when I was at the old V-Twin shop, and it was bad then.
The int'l motorcycle show is this weekend in Rosemont, and is MUCH better of a time...
Joe a.k.a ProTeal55 a.k.a JoeyCocks a.k.a Maker of Friends

Offline ElCheapo

  • Hot Shot
  • ***
  • Posts: 556
    • Anubis Cycle
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #18 on: February 05, 2007, 11:30:56 AM »
I wish I knew you were going Tom, I would of warned you NOT TOO..
I used to "work" that show when I was at the old V-Twin shop, and it was bad then.
The int'l motorcycle show is this weekend in Rosemont, and is MUCH better of a time...

Not a chance I will go again

"I do not like them, Sam I am" "I do not like green eggs and ham"  :D
Contact me for affordable rotor drilling services at $55 each rotor. Same day service on CB750/CB500/CB550 rotors. Next day on everything else.

Offline aptech77

  • Expert
  • ****
  • Posts: 850
Re: McCormick Place - Chicago motorcycle show this Sat Feb,03 = Waste of time.
« Reply #19 on: February 10, 2007, 02:53:19 PM »
CW show rocked.....Now I need big bucks for some new bikes and gear,
MV Brutale
Ducati Monster S4R
Yamaha R1
Ducati 1098
Honda CBR600RR
a few more nice bikes
and some new gear............... 8)