Author Topic: Oh dear ... (Read 45412 times)

RAFster122s · « **Reply #150 on:** July 04, 2021, 07:30:32 AM »

Looked it up, single stage polyurethane enamel. That should be pretty durable when cured…has decent gloss.

69cb750 · « **Reply #151 on:** July 04, 2021, 08:23:36 AM »

I used enamel previously.
Paint shop said try this, high gloss, no runs, tougher then enamel.

BenelliSEI · « **Reply #152 on:** July 05, 2021, 05:14:54 AM »

Thanks..... I’ll try it next project.

69cb750 · « **Reply #153 on:** July 05, 2021, 01:38:21 PM »

69cb750 · « **Reply #154 on:** July 05, 2021, 01:39:08 PM »

69cb750 · « **Reply #155 on:** July 05, 2021, 01:40:03 PM »

seanbarney41 · « **Reply #156 on:** July 05, 2021, 07:05:25 PM »

You measure those?...bet it's an 812

69cb750 · « **Reply #157 on:** July 06, 2021, 04:32:15 AM »

Looks like these - https://www.lossaengineering.com/products/je-piston-big-bore-kit-for-honda-cb750#:~:text=Fits%20all%201969-1978%20CB750%27s.%20Made%20in%20the%20U.S.A.,cc.%20Compression%20Ratio%3A%2010.5%3A1.%20Ships%20in%204-5%20days.

69cb750 · « **Reply #158 on:** July 06, 2021, 03:03:38 PM »

69cb750 · « **Reply #159 on:** July 06, 2021, 03:04:23 PM »

seanbarney41 · « **Reply #160 on:** July 06, 2021, 04:18:34 PM »

Quote from: 69cb750 on July 06, 2021, 04:32:15 AM

Looks like these - https://www.lossaengineering.com/products/je-piston-big-bore-kit-for-honda-cb750#:~:text=Fits%20all%201969-1978%20CB750%27s.%20Made%20in%20the%20U.S.A.,cc.%20Compression%20Ratio%3A%2010.5%3A1.%20Ships%20in%204-5%20days.

you gonna put those back in there?

69cb750 · « **Reply #161 on:** July 07, 2021, 01:48:56 PM »

Quote

you gonna put those back in there?

Replacing liners, using original pistons.

seanbarney41 · « **Reply #162 on:** July 07, 2021, 02:04:27 PM »

Quote from: 69cb750 on July 07, 2021, 01:48:56 PM

Quote
you gonna put those back in there?
Replacing liners, using original pistons.

let me know if you want to sell the big bore stuff

seanbarney41 · « **Reply #163 on:** July 07, 2021, 07:16:55 PM »

Quote from: seanbarney41 on July 07, 2021, 02:04:27 PM

Quote from: 69cb750 on July 07, 2021, 01:48:56 PM
Quote
you gonna put those back in there?
Replacing liners, using original pistons.

let me know if you want to sell the big bore stuff

wow! ...little xmas in July here. I do appreciate it.

69cb750 · « **Reply #164 on:** July 08, 2021, 02:02:28 PM »

Bearings and primary chains were worn.

69cb750 · « **Reply #165 on:** July 08, 2021, 02:03:13 PM »

69cb750 · « **Reply #166 on:** July 08, 2021, 02:03:59 PM »

69cb750 · « **Reply #167 on:** July 09, 2021, 01:03:29 PM »

Benelli,
What pegs does your 69 have ?
Round end or square end ?

69cb750 · « **Reply #168 on:** July 13, 2021, 05:34:27 PM »

69cb750 · « **Reply #169 on:** July 13, 2021, 05:35:15 PM »

Alan F. · « **Reply #170 on:** July 14, 2021, 07:29:20 AM »

Shiny and all trued up waiting for a new set of shoes!

MauiK3 · « **Reply #171 on:** July 14, 2021, 08:11:36 AM »

Lacing them up is a real job, congratulations!

BenelliSEI · « **Reply #172 on:** July 14, 2021, 03:47:10 PM »

Quote from: 69cb750 on July 09, 2021, 01:03:29 PM

Benelli,
What pegs does your 69 have ?
Round end or square end ?

Sorry for the delay! Cutting and bailing hay the past few days and every piece of equipment broke, snapped, sheared and flew in every direction!!!! Lots of shop time, but mostly outside, beating on haybine, vintage rake, and a bailer that’s almost as old..... I’ll have a look and let you know.

69cb750 · « **Reply #173 on:** July 14, 2021, 05:28:02 PM »

Quote

Shiny and all trued up waiting for a new set of shoes!

I have new tires

Quote

Lacing them up is a real job, congratulations!

Thanks for the note.

Quote

Sorry for the delay! Cutting and bailing hay the past few days and every piece of equipment broke, snapped, sheared and flew in every direction!!!! Lots of shop time, but mostly outside, beating on haybine, vintage rake, and a bailer that’s almost as old..... I’ll have a look and let you know.

I would like to know the years for the foot pegs if you know.

69cb750 · « **Reply #174 on:** July 14, 2021, 05:28:54 PM »

News:

Author Topic: Oh dear ... (Read 45412 times)