Author Topic: Calling all delkevic/k7 750 owners, where the heck do these bolt up?  (Read 625 times)

0 Members and 1 Guest are viewing this topic.

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Just got around to putting on the new delkevic and its sweet! Bolted on with no issues. The question now is.. where the heck do these brackets with the rubber bumper stops attach? And where are these spacers to go? If anyone could snap some pics for me I'd be forever in your debt. It came with some longer bolts so I'd imagine the longer bolts and spacers go on the bracket for the muffler.. but the left side is what's mostly escaping me.

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #1 on: March 25, 2020, 03:52:34 PM »
Re uploading this picture because it seems to have become corrupted in the original post

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #2 on: March 25, 2020, 03:59:17 PM »
The ones with the rubber stoppers are for attaching the can to the frame. The rubber parts are for the center stand to rest on. The aluminum spacers are there to help you make it all fit. You need to try different combo's to get the right one for your bike. I had to fab up some extra brackets to get mine firmly attached.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #3 on: March 25, 2020, 04:01:39 PM »
So both rubber stoppers go on the right side?
Also it came with a flat black bracket for attaching the silencer to the passenger foot peg hole on the right

Offline CaptFatCat

  • Full Member
  • *
  • Posts: 79
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #4 on: March 25, 2020, 04:27:39 PM »
Mine came with several optional parts also. just figure out which ones work best and lock them down. throw the rest in your bolt box for use on something else later.
Resurrecting a Herman Munster CB750 from a few old baskets of K2 and K7 parts.

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #5 on: March 26, 2020, 06:36:10 AM »
Oh boy I hate having extra parts! Makes me anxious lol.

Offline beemerbum

  • Expert
  • ****
  • Posts: 1,060
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #6 on: March 26, 2020, 08:55:59 AM »
Mine came with several optional parts also. just figure out which ones work best and lock them down. throw the rest in your bolt box for use on something else later.
Same here. I have a box full of spacers etc from the installation The longer of the two brackets with rubber stopper that mount to the foot peg mount is the correct one  to properly limit travel of the center stand upwards when retracted. You can see the center stand resting against the rubber stopper in the photo
« Last Edit: March 26, 2020, 09:05:38 AM by beemerbum »

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #7 on: March 26, 2020, 09:13:31 AM »
When choosing the right bracket with the center stand stop, the most important part is the clearance between the chain and the center stand. You want to make sure that when the stand is up and you are sitting on the bike that the chain doesn't rub the stand foot.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #8 on: March 26, 2020, 01:09:48 PM »
Here's the fitment PDF for the k7 kit. I just spoke to their customer support team over email!
 http://cloud.tapatalk.com/s/5e7d0babe3c9f/FitmentUK.pdf

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #9 on: April 01, 2020, 01:26:19 PM »
Sorry for the dark pic. For anyone else who isn't sure, I was able to use the bigger spacers and the longer fasteners. I used some blue threadlock because they weren't engaging with the nut more than 3 or so threads. Bolts could have been just a tiny bit longer

Offline Jnel

  • Hot Shot
  • ***
  • Posts: 296
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #10 on: April 06, 2020, 04:59:39 PM »
First... i love the exhaust.   The sound is perfect.  This is my installation.  Was simple.  No center stand so that made it a good bit easier for me. I made a custom rear set bracket and the aft mounting bracket for the pipe was reversed and bolted up perfectly.    If anyone needs better photos i can provide close ups.

Ride on...
Jnel

Sent from my SM-N950U using Tapatalk


Offline Jnel

  • Hot Shot
  • ***
  • Posts: 296
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #11 on: April 06, 2020, 05:02:33 PM »
This a better view of the mounting.

Sent from my SM-N950U using Tapatalk


Offline Jnel

  • Hot Shot
  • ***
  • Posts: 296
Re: Calling all delkevic/k7 750 owners, where the heck do these bolt up?
« Reply #12 on: April 06, 2020, 05:16:12 PM »
This is how it mounted with the original foor controls.

Sent from my SM-N950U using Tapatalk