« previous next »
Pages: [1]   Go Down

Author Topic: Hard to roll backwards  (Read 1004 times)

0 Members and 3 Guests are viewing this topic.

Offline reliv77

  • Enthusiast
  • **
  • Posts: 145
Hard to roll backwards
« on: April 03, 2020, 02:20:28 pm »
So I have not moved my 77 750F Super Sport all winter. Started it up a few times. Now when I try to push it backwards its very hard to do. Like the brake is stuck. Any ideas why?
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Hard to roll backwards
« Reply #1 on: April 03, 2020, 02:23:46 pm »
 Put it on the c stand , see which wheel drags . I usually put a block of wood with a rag against calibre and whack it. See if th st helps.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline reliv77

  • Enthusiast
  • **
  • Posts: 145
Re: Hard to roll backwards
« Reply #2 on: April 03, 2020, 02:36:09 pm »
 I have always had a hard time putting the bike on the center stand. Any tricks to it?
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 13,933
  • CB500 Number 1000036
Re: Hard to roll backwards
« Reply #3 on: April 03, 2020, 02:38:42 pm »
Eat more porrige
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline jakec

  • Master
  • *****
  • Posts: 2,075
Re: Hard to roll backwards
« Reply #4 on: April 03, 2020, 02:41:49 pm »
Quote from: bryanj on April 03, 2020, 02:38:42 pm
Eat more porrige

this is a common misconception, it's actually spinach that gives the big forearms necessary.
Logged
1970 CB750 K0
1977 CB750 Chop
1997 XR650L

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,990
  • WHAT?no gravy?
Re: Hard to roll backwards
« Reply #5 on: April 03, 2020, 03:08:00 pm »
push down on the stand as you lift the bike up more than trying to roll it backwards onto the stand,and eat more porridge with spinach.
Logged

Offline spotty

  • Master
  • *****
  • Posts: 1,918
  • cb750....for when a Vmax is just too much bike
    • spottys world of vmaxes and great danes
Re: Hard to roll backwards
« Reply #6 on: April 03, 2020, 03:32:54 pm »
Quote from: reliv77 on April 03, 2020, 02:36:09 pm
I have always had a hard time putting the bike on the center stand. Any tricks to it?

Take the engine out,  makes it much easier
Logged
i blame Terry

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,990
  • WHAT?no gravy?
Re: Hard to roll backwards
« Reply #7 on: April 03, 2020, 03:49:13 pm »
eat spinach first though,them engines is heavy.
Logged

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,134
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Hard to roll backwards
« Reply #8 on: April 03, 2020, 04:20:04 pm »
Another suggestion for centerstand success is hard soled shoes (boots) so you can really put some pressure on the centerstand foot lever.
Logged
intrigued by the wail...seduced by the scream.

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,757
  • 1969 cb750
Re: Hard to roll backwards
« Reply #9 on: April 03, 2020, 04:22:55 pm »
A trick I used with my ‘75 GL1000: leave a short piece of scrap 2x4” lumber on the floor (12” is long enough). Roll the rear tire up on it before using the centre stand. Put the tire at the rear of the scrap, so it rolls off it as you push down the centre stand (so it’s free when your done). Kick it out of the way, for next time.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Hard to roll backwards
« Reply #10 on: April 03, 2020, 04:28:07 pm »
What he said last post..sometimes a 1x4 will do.   ::)
Far worse if bike is lowered.. it can take 3 men and a donkey to get it up if it is lowered a lot.. :o   :o
« Last Edit: April 03, 2020, 04:30:22 pm by 754 »
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline robvangulik

  • Honda Fourever
  • Expert
  • ****
  • Posts: 1,417
Re: Hard to roll backwards
« Reply #11 on: April 03, 2020, 04:41:57 pm »
Quote from: 754 on April 03, 2020, 02:23:46 pm
Put it on the c stand , see which wheel drags . I usually put a block of wood with a rag against calibre and whack it. See if th st helps.
A simple kick to the side of the caliper works fine also. And then it goes on the centre stand more easy too, with the brake unstuck.
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,788
  • Saver of unloved motorcycles.
Re: Hard to roll backwards
« Reply #12 on: April 04, 2020, 03:50:00 pm »
 ^ what those 3 guys said, and it's more about the step down than the lift up.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Alaxy Galaxy

  • Hot Shot
  • ***
  • Posts: 327
Re: Hard to roll backwards
« Reply #13 on: April 05, 2020, 04:10:26 pm »
But if his bike can't roll backwards, it makes putting it up on the center stand that much more difficult...
Logged

Offline robvangulik

  • Honda Fourever
  • Expert
  • ****
  • Posts: 1,417
Re: Hard to roll backwards
« Reply #14 on: April 05, 2020, 05:01:13 pm »
Quote from: Alaxy Galaxy on April 05, 2020, 04:10:26 pm
But if his bike can't roll backwards, it makes putting it up on the center stand that much more difficult...
Not if he fixes his problem
Logged
Pages: [1]   Go Up
« previous next »