« previous next »
Pages: [1]   Go Down

Author Topic: Front axle parts missing/identification  (Read 713 times)

0 Members and 1 Guest are viewing this topic.

Offline Blakesblakey

  • Full Member
  • *
  • Posts: 42
Front axle parts missing/identification
« on: April 12, 2020, 11:58:48 AM »
Putting my front axle back on the bike I noticed that on the speedometer gear side there is holes going through the axle and there is nothing there, looking at the diagram what are parts 36&41? Those look to me to be what I'm missing.  Any help is appreciated!
Logged

Offline Blakesblakey

  • Full Member
  • *
  • Posts: 42
Re: Front axle parts missing/identification
« Reply #1 on: April 12, 2020, 12:13:34 PM »
Also what wires go to what on a pamco electronic ignition? I recently got a 74 cb550 project that is down to just wiring for the starting system and I'm trying to figure everything out for a M-unit. 
Logged

Online bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,187
  • CB500 Number 1000036
Re: Front axle parts missing/identification
« Reply #2 on: April 12, 2020, 12:16:57 PM »
There is nothing missing i can see, no idea on pamco, never seen one
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Blakesblakey

  • Full Member
  • *
  • Posts: 42
Re: Front axle parts missing/identification
« Reply #3 on: April 12, 2020, 12:18:29 PM »
Quote from: bryanj on April 12, 2020, 12:16:57 PM
There is nothing missing i can see, no idea on pamco, never seen one

Okay good to hear, do you know what the holes in the axle are for then?
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: Front axle parts missing/identification
« Reply #4 on: April 12, 2020, 12:26:41 PM »
Maybe a leverage point by putting a tool through there.
Logged

Offline Blakesblakey

  • Full Member
  • *
  • Posts: 42
Re: Front axle parts missing/identification
« Reply #5 on: April 12, 2020, 12:35:09 PM »
Quote from: ekpent on April 12, 2020, 12:26:41 PM
Maybe a leverage point by putting a tool through there.

Makes sense thanks!
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,050
Re: Front axle parts missing/identification
« Reply #6 on: April 12, 2020, 12:40:08 PM »
Its for holding the axle without scarring it, when removing the nut.
« Last Edit: April 12, 2020, 03:32:29 PM by 754 »
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,234
Re: Front axle parts missing/identification
« Reply #7 on: April 12, 2020, 01:17:15 PM »
Logged
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 10,410
  • 1969 cb750
Re: Front axle parts missing/identification
« Reply #8 on: April 12, 2020, 02:37:21 PM »
36/41 are the Allen head bolt and sealing washer the screw up, through the fork leg. They are in a recess under the axle. Nothing goes through that hole in the axle......
Logged

Offline Blakesblakey

  • Full Member
  • *
  • Posts: 42
Re: Front axle parts missing/identification
« Reply #9 on: April 12, 2020, 02:54:51 PM »
Quote from: BenelliSEI on April 12, 2020, 02:37:21 PM
36/41 are the Allen head bolt and sealing washer the screw up, through the fork leg. They are in a recess under the axle. Nothing goes through that hole in the axle......

Thanks!
Logged

Offline Blakesblakey

  • Full Member
  • *
  • Posts: 42
Re: Front axle parts missing/identification
« Reply #10 on: April 12, 2020, 03:17:05 PM »
Logged
Pages: [1]   Go Up
« previous next »