« previous next »
Pages: [1]   Go Down

Author Topic: Is gasket sealer required on cylinder block ?  (Read 344 times)

0 Members and 1 Guest are viewing this topic.

Offline nbcam

  • Full Member
  • *
  • Posts: 56
Is gasket sealer required on cylinder block ?
« on: April 06, 2020, 06:56:10 PM »
Just got my cb550 head and cylinder block back from the machine shop. It appears the guy that had the bike before me went a little crazy with the dermel !!

The bottom surface of cylinder block has some small grinding marks from the dermel, the machine shop recommend for me to put a small amount of gasket sealer on the surface when reassembling

Looking for advice, would you recommend sealer or do you think a new gasket will be enough to stop oil leaking because of bad surface







Sent from my iPhone using Tapatalk
Logged

Offline disco

  • Hot Shot
  • ***
  • Posts: 571
Re: Is gasket sealer required on cylinder block ?
« Reply #1 on: April 06, 2020, 11:17:26 PM »
No sealant. Gasket only.
Logged
1976 CB750 K6 Sapphire Blue
1972 CB750 K2 836 Orange Sunrise
1972 CB750 K2 Candy Red
1972 CB750 K2 Candy Gold'

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,938
  • Bought her new 4/75
Re: Is gasket sealer required on cylinder block ?
« Reply #2 on: April 07, 2020, 10:23:36 AM »
No sealer. Gaskets go on dry. The dermel marks are on the opposite side as the oil anyway.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline nbcam

  • Full Member
  • *
  • Posts: 56
Re: Is gasket sealer required on cylinder block ?
« Reply #3 on: April 07, 2020, 11:35:20 AM »
Thanks for the response, just wanted some feedback before I start to put this all back together


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »