« previous next »
Pages: [1]   Go Down

Author Topic: Regarding that large fang on center stand....  (Read 1772 times)

0 Members and 1 Guest are viewing this topic.

Offline Master Ted

  • Hot Shot
  • ***
  • Posts: 301
Regarding that large fang on center stand....
« on: February 09, 2007, 06:45:07 PM »
For those who like their center stand and have regressed to the 4-1 exhaust - what have you done about that long peg hanging out the side? Did you cut a few inches off?
Logged
CB750/K2

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: Regarding that large fang on center stand....
« Reply #1 on: February 09, 2007, 07:12:29 PM »
In the case of the CB750, I've seen most folks just get a small length of aluminum bar stock and drill a hole in one end to attach it behind the left-hand footpeg using the footpeg bolt. This keeps it pushed down just enough so the chain doesn't grind on it. I think the mounting might be a little different for the 500...
Logged
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

Offline Master Ted

  • Hot Shot
  • ***
  • Posts: 301
Re: Regarding that large fang on center stand....
« Reply #2 on: February 09, 2007, 07:39:32 PM »
Quote from: Jonesy on February 09, 2007, 07:12:29 PM
In the case of the CB750, I've seen most folks just get a small length of aluminum bar stock and drill a hole in one end to attach it behind the left-hand footpeg using the footpeg bolt. This keeps it pushed down just enough so the chain doesn't grind on it. I think the mounting might be a little different for the 500...

I was thinking more along the lines that the dang thing sticks out so far (to clear what used t/b space occupied by mufflers) that its a hazard. I've already banged my shins on the thing just pushing bike aroundin my work space.

« Last Edit: February 09, 2007, 07:45:50 PM by staphcar »
Logged
CB750/K2

Offline mick750F

  • Expert
  • ****
  • Posts: 1,395
Re: Regarding that large fang on center stand....
« Reply #3 on: February 09, 2007, 07:50:33 PM »
   I can think of three things...Cut it back so it doesn't stick out so far...Try a center stand from an F model...Or wear shin guards. :D

Mike
Logged
'
Glosta, MA
It's not the heat...it's the humanity.

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,939
  • Bought her new 4/75
Re: Regarding that large fang on center stand....
« Reply #4 on: February 09, 2007, 07:58:22 PM »
You guys need to get with the F program. I don't seem to have those issues  ;D
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline siter81

  • vintage bike junkie!
  • Hot Shot
  • ***
  • Posts: 448
  • TOO MANY BIKES? NEVER
Re: Regarding that large fang on center stand....
« Reply #5 on: February 09, 2007, 08:35:25 PM »
Look before you push.
Works for me every time?








Siter81     8) 8)
Logged
61 BMW R27 70 BMW R75/5  75 RD350
71 SUZUKI T500
75 CB750K5  Weisco 836, WEB CAM.DYNA IGN,KERKER,K&N,TAYLOR,GALFER,AGM ETC. 
 01 HONDA VC11000C3 AERO.
74&75 DUCATI 860 GT'S

Offline 736cc

  • Master
  • *****
  • Posts: 1,724
Re: Regarding that large fang on center stand....
« Reply #6 on: February 09, 2007, 08:45:51 PM »
leave it off and keep it in your garage until neede
Logged

Offline chung

  • Hot Shot
  • ***
  • Posts: 335
  • Giddy Up
    • chungfucycles.com
Re: Regarding that large fang on center stand....
« Reply #7 on: February 09, 2007, 09:44:20 PM »
Depending on the project, I pitch the stand and cut the brackets off. Gotta weigh ten pounds and you only really need it if you are doing a repair on the side of the road.
Logged
Member#2815
1971/76 CB750 Hack @970cc,
1975 CG750K
1970 CB350,
1972 YDS7, 250
1972 YR5, 350
1977 RD400,
1978 Piaggio Grande/Batavas HS50 Special
1981 XS650 Special II

Offline xtalon

  • Expert
  • ****
  • Posts: 773
Re: Regarding that large fang on center stand....
« Reply #8 on: February 10, 2007, 06:53:59 AM »
Take it off.  Put it on the scrap pile to China and let them turn it into a cheap knock off race stand.   That's what I did.  :)
Logged
1976 Honda CB750K
2006 Yamaha R6v
2009 Ducati SportsClassic Bi-posto

Offline DME

  • Hot Shot
  • ***
  • Posts: 680
Re: Regarding that large fang on center stand....
« Reply #9 on: February 10, 2007, 09:46:49 AM »
Take it off and stash it somewhere in the garage for the future.
Centerstands were frequently ditched during the seventies to shed weight and are now getting harder to come by every minute.

On my bike I removed the brackets from the frame, but that´s only because I never will go back to stock again.

Cheers
Dan
Logged
Pages: [1]   Go Up
« previous next »