Author Topic: A very nice High Pipe.. (Read 2035 times)

754 · « **on:** April 21, 2020, 12:39:09 PM »

Man its is nice work, a place in INDY, Northbilt I think it is.
Great work and an inspiration to make a high pipe.,

ken65 · « **Reply #1 on:** April 21, 2020, 02:17:03 PM »

Wow. Look at that. Amazing job.

KPSguy · « **Reply #2 on:** April 21, 2020, 03:45:20 PM »

Looks awesome! 550 four ! Much work went into that.

Sent from my SM-G892A using Tapatalk

Stev-o · « **Reply #3 on:** April 21, 2020, 04:06:35 PM »

Quote from: KPSguy on April 21, 2020, 03:45:20 PM

550 four !

Doesnt look like a 550 but awesome pipes.

KPSguy · « **Reply #4 on:** April 21, 2020, 04:45:44 PM »

My new pipes! Not as Cool as the Honda , but still screams! Higgspeeds from the UK.! Bbrrrrppp.

Sent from my SM-G892A using Tapatalk

KPSguy · « **Reply #5 on:** April 21, 2020, 04:53:11 PM »

Quote from: Stev-o on April 21, 2020, 04:06:35 PM

Quote from: KPSguy on April 21, 2020, 03:45:20 PM
550 four !

Doesnt look like a 550 but awesome pipes.

My Bad 350 four correct?

Sent from my SM-G892A using Tapatalk

BenelliSEI · « **Reply #6 on:** April 21, 2020, 05:41:22 PM »

Those are amazing pipes! Has anyone ever tried that on a cb750?

754 · « **Reply #7 on:** April 21, 2020, 08:33:44 PM »

Yes I have seen a few, I think they are great for a low riding chopper.
4 into 2 is a lot harder that a 4 into 1 high pipe.

carnivorous chicken · « **Reply #8 on:** April 22, 2020, 12:39:24 PM »

Quote from: KPSguy on April 21, 2020, 04:53:11 PM

Quote from: Stev-o on April 21, 2020, 04:06:35 PM
Quote from: KPSguy on April 21, 2020, 03:45:20 PM
550 four !

Doesnt look like a 550 but awesome pipes.
My Bad 350 four correct?

Sent from my SM-G892A using Tapatalk

Yep.

BPellerine · « **Reply #9 on:** May 01, 2020, 04:31:25 PM »

nice but dont know if I would like them that close to the carbs,but these carbs dont leak right?haha

HondaMan · « **Reply #10 on:** May 10, 2020, 08:52:10 PM »

Now. THAT is some pipe-bending skill!

754 · « **Reply #11 on:** May 10, 2020, 09:22:53 PM »

I think when I looked at his site on Instagram , he used mostly mandrel prevent sections. To weld them so it looks like one pipe, that is the trick..

grcamna2 · « **Reply #12 on:** May 10, 2020, 10:06:37 PM »

VERY Nice pipes

simon#42 · « **Reply #13 on:** May 11, 2020, 09:18:39 AM »

if that was mine after about the tenth time i would have got burnt by it i would have taken it off beaten it flat with a hammer and thrown it in a skip .

754 · « **Reply #14 on:** May 11, 2020, 09:52:24 AM »

Well most people build high pipes for a reason, theyare not easy.
And if you got burned, which would only be behind the kicker and shifter, it would only make sense to make a guard.

I see he scalloped tye edge of the stock drilled disc, nice touch, a bit of work., looks good..

grcamna2 · « **Reply #15 on:** May 11, 2020, 10:03:37 AM »

Quote from: 754 on May 11, 2020, 09:52:24 AM

Well most people build high pipes for a reason, theyare not easy.
And if you got burned, which would only be behind the kicker and shifter, it would only make sense to make a guard.

I see he scalloped tye edge of the stock drilled disc, nice touch, a bit of work., looks good..

A couple shields,that's the finishing touch;probably custom made pipes to each customers desire.I think it's good looking exhaust work.

simon#42 · « **Reply #16 on:** May 11, 2020, 11:00:53 AM »

no , look at that front mudguard . that bike was built for looks and looks only . hipsters suffer for their art .

754 · « **Reply #17 on:** May 11, 2020, 11:58:00 AM »

So what ? You don't have to ride it..
Sort of like a road race bike.. it's of little use to me, but I can let other people enjoy that sort of thing.,

If I look at a bike, and get one idea from it it's an inspiration. If I look at a bike that is not my style but it is well done, I would compliment the owner. I would rather see nice work, than ordinarily work any day of the week..
Now the scalloped rotor , that's not a bad idea. . If you insist on running the heavy stock rotor, its one more way to trim some weight.,

Medyo Bastos · « **Reply #18 on:** May 11, 2020, 02:44:25 PM »

Looks great! I like it!

Sent from my iPhone using Tapatalk

jakec · « **Reply #19 on:** May 11, 2020, 03:29:37 PM »

I spent too much time working on CL's now that I don't even like the way the pipes look because it reminds me of the pain of always taking them off to do stuff. That and the tanks with a cross over

RAFster122s · « **Reply #20 on:** May 11, 2020, 03:38:42 PM »

Godffrey has been doing that to some rotors recently.

seanbarney41 · « **Reply #21 on:** May 11, 2020, 04:30:48 PM »

Quote from: jakec on May 11, 2020, 03:29:37 PM

I spent too much time working on CL's now that I don't even like the way the pipes look because it reminds me of the pain of always taking them off to do stuff. That and the tanks with a cross over

+1! I won't own another bike with a fuel crossover!

BenelliSEI · « **Reply #22 on:** May 24, 2020, 06:52:54 AM »

Jakec...... reminded me of his little project, a few years ago. Got all the mechanical work done and then realized the exhaust had to come off to install the left side cover! Really? Yes!

News:

Author Topic: A very nice High Pipe.. (Read 2035 times)

ken65