« previous next »
Pages: [1]   Go Down

Author Topic: CB550 Jetting questions with 4in1 exhaust  (Read 1101 times)

0 Members and 1 Guest are viewing this topic.

Offline jacksonsk

  • Full Member
  • *
  • Posts: 9
CB550 Jetting questions with 4in1 exhaust
« on: April 25, 2020, 06:21:33 PM »
Kept the stock air filter and running a delkavic megaphone 4into1 exhaust. Running lean.
Carbs are stock jets, Was wondering if anyone has input on which jets they are using with their 4in1 with baffle in? I would love to find a place to start. thank you! 8)
Logged

Offline Pielz

  • Hot Shot
  • ***
  • Posts: 565
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #1 on: April 25, 2020, 06:55:15 PM »
Delkevic, at least on my 750, specifically said that I didn't need to re-jet. And I didn't!

Sorry I just saw that you said you were running lean. I guess that makes my response pretty unhelpful huh? Lol
Sent from my LG-G710 using Tapatalk
« Last Edit: April 25, 2020, 07:12:15 PM by Pielz »
Logged

Offline jayrdee

  • Full Member
  • *
  • Posts: 24
    • @JacobDurbin
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #2 on: April 25, 2020, 07:13:08 PM »
I just installed a Delkevic 4-1 on my CB750 (and I took the baffle out), went two sizes higher on my main jets, and lowered the needle clip to the middle position. It was originally in the top/lean position.

Was it necessary?  Probably not, but the but dyno feels a difference Lol.
Logged
[I have no idea what I'm doing]

Offline jc914

  • Full Member
  • *
  • Posts: 12
  • 1974 CB550 "In progress"
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #3 on: April 29, 2020, 08:45:55 AM »
Try 110 main jets for a start.
Logged
1974 CB550K0

Offline steeldoncb550

  • Full Member
  • *
  • Posts: 75
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #4 on: April 29, 2020, 09:34:38 AM »
110’s will be too much for only the exhaust. Start at 100’s.
Logged

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #5 on: April 29, 2020, 09:49:02 AM »
What year and model 550?
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline jc914

  • Full Member
  • *
  • Posts: 12
  • 1974 CB550 "In progress"
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #6 on: April 29, 2020, 10:14:51 AM »
@steeldoncb550,  74-76 (CB550K) stock main jets are#100.  75-77 (CB550F) is #98. 

https://www.sohc4.net/cb550-faq/indexphp/cb500550-carb-specs
Logged
1974 CB550K0

Offline jacksonsk

  • Full Member
  • *
  • Posts: 9
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #7 on: April 30, 2020, 05:15:32 PM »
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,020
  • I refuse...
Re: CB550 Jetting questions with 4in1 exhaust
« Reply #8 on: April 30, 2020, 06:28:58 PM »
105s maximum. you should also check the needle clip position. With stock jets, simply moving the needle a clip richer might be easiest and best remedy.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis
Pages: [1]   Go Up
« previous next »