Author Topic: Buttons or clips  (Read 1318 times)

0 Members and 1 Guest are viewing this topic.

Offline Laids

  • Enthusiast
  • **
  • Posts: 121
Buttons or clips
« on: April 14, 2020, 08:37:59 am »
Am slowly getting this engine back together and taking advantage during this self isolation period. I seem to have misplaced a couple of wrist pin clips but I do have enough buttons. Anybody have any comments on the use of buttons instead of clips?

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,803
Re: Buttons or clips
« Reply #1 on: April 14, 2020, 02:56:32 pm »
Clips without tag-ends are preferred............buttons have been found squished between the piston and cylinder-wall if not properly installed.
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline Laids

  • Enthusiast
  • **
  • Posts: 121
Re: Buttons or clips
« Reply #2 on: April 14, 2020, 04:11:27 pm »
Whats the proper way of installing buttons? I assumed they just floated, sometimes slightly marking the cylinder walls.

Offline Laids

  • Enthusiast
  • **
  • Posts: 121
Re: Buttons or clips
« Reply #3 on: April 21, 2020, 01:53:24 pm »
Well, I used the buttons, just seemed so much easier.

Cheers

Offline Leino

  • Not much of an
  • Expert
  • ****
  • Posts: 1,248
  • in drag racing since 2005
Re: Buttons or clips
« Reply #4 on: April 23, 2020, 02:27:40 am »
Whats the proper way of installing buttons? I assumed they just floated, sometimes slightly marking the cylinder walls.
In a racing engine you disassemble often.

Offline Laids

  • Enthusiast
  • **
  • Posts: 121
Re: Buttons or clips
« Reply #5 on: April 24, 2020, 07:33:32 pm »
I have two friends that used to race 3/4 midgets and remember their discussion about whether to use buttons or not. I finally asked a friend who is a experienced aircraft mechanic and he said yes, why not. Way easier, which I agree with. Anyway, they are installed and moving on to the next step.