Topic: 1975 CB750k Wiring Harness?

[750K5]

Any luck with remanufactured wiring harnesses? I'm debating cleaning up the original or replacing w a clean new harness. Any suggestions would be appreciated.
Thanks

[Jerry Rxman Griffin aka MuthaF'er]

I bought an after market harness for one of my F's. Works great. I now have the proper voltage running through my system. I love those shiny new tight connectors. I did manage to find a NOS harness some years back for my other F but that was sheer luck.

[750K5]

I bought an after market harness for one of my F's. Works great. I now have the proper voltage running through my system. I love those shiny new tight connectors. I did manage to find a NOS harness some years back for my other F but that was sheer luck.

Which company did you go with for your aftermarket harness?

[jfmcclure]

The harness  I used was from Yamiya It worked well for me. The only thing I needed to do to it was build two jump wire for the rear signals as the harness wires were a little short.

[BenelliSEI]

I used one from vintsgecb750 on my ‘75 cb750F and the Rickman. Both worked well.

[750K5]

I used one from vintsgecb750 on my ‘75 cb750F and the Rickman. Both worked well.

I think I'll go with Vintagecb750 also.  I'm kinda spooked by international shipping currently

[Jerry Rxman Griffin aka MuthaF'er]

I believe it was Vintage also. Not too many places to get the F harness.