Author Topic: 750 seat compatibility  (Read 1240 times)

0 Members and 1 Guest are viewing this topic.

Offline Antares Red

  • Full Member
  • *
  • Posts: 2
750 seat compatibility
« on: June 30, 2020, 01:40:34 PM »
I got a '76 CB750K6.
The PO had installed a "King & Queen" seat that I'd like to replace.
Can I fit a '76 750F1 super sport seat to it without frame modification.
Will it fit with the K6 tank. (and not look too weird).
whats involved fitting the tail light to the super sport seat cowl.

Thanks

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,903
  • Bought her new 4/75
Re: 750 seat compatibility
« Reply #1 on: June 30, 2020, 03:00:37 PM »
No, not a direct swap. Seats and tanks are different lengths. Hinge too maybe?
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: 750 seat compatibility
« Reply #2 on: June 30, 2020, 03:06:36 PM »
 Yes the hinges are completely different. You can use any seat from a 1970 up to a 1976 if they are all K models. Maybe some people will post links to some reasonably priced re-pops out there. There's a good chance your king and queen still has an original Honda seat pan also if your handy.

Online BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,883
  • 1969 cb750
Re: 750 seat compatibility
« Reply #3 on: June 30, 2020, 07:02:52 PM »
KO-2 had a different latch and it’s held on by two bolts. You’ll have an easier fit if you get K3-6 seats, the latching pin (held on by two studs with washers and nuts, allowing for minor alignment adjustment) will fit directly into your lock. They are easy to spot, they also have the plastic lid that Honda called a “document holder”. K7 and K8 seats are different again......

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: 750 seat compatibility
« Reply #4 on: June 30, 2020, 07:30:27 PM »
KO-2 had a different latch and it’s held on by two bolts. You’ll have an easier fit if you get K3-6 seats, the latching pin (held on by two studs with washers and nuts, allowing for minor alignment adjustment) will fit directly into your lock. They are easy to spot, they also have the plastic lid that Honda called a “document holder”. K7 and K8 seats are different again......
Forgot about the latch system but will fit if that's eliminated. I bought a K5 chopper that came with a K0 ducktail seat which was kind of a bonus. Still have it on there.

Offline Antares Red

  • Full Member
  • *
  • Posts: 2
Re: 750 seat compatibility
« Reply #5 on: July 01, 2020, 05:04:07 PM »
thanks for all the info everybody.
guess I'll just get a foam & cover kit when the time comes as I believe the seat-pan to be original.
there was/is a '76 750F1 seat for sale on the local Craigslist W/cowl for a reasonable price ($150)

hill29493

  • Guest
Re: 750 seat compatibility
« Reply #6 on: July 06, 2020, 12:15:52 PM »
Iv done it to mine

Sent from my F8331 using Tapatalk


hill29493

  • Guest
Re: 750 seat compatibility
« Reply #7 on: July 06, 2020, 12:16:38 PM »
Iv done it to mine

Sent from my F8331 using Tapatalk
But I used the 400ss seat


Sent from my F8331 using Tapatalk