Topic: oil cooler on 750A

[Randy Nevrotski]

I took a oil cooler off a 75 CB750 when I tried putting it on my 76 CB750A the oil filter holder with center bolt wont fit its hitting my 4into1 stock pipes what can I do    I also have a oil cooler and plate off 650 nighthawk the only way to put that on the lines have to be facing down then I will have to get lines made what is best way to go. what size size lines

[Sam Green Racing]

I took a oil cooler off a 75 CB750 when I tried putting it on my 76 CB750A the oil filter holder with center bolt wont fit its hitting my 4into1 stock pipes what can I do    I also have a oil cooler and plate off 650 nighthawk the only way to put that on the lines have to be facing down then I will have to get lines made what is best way to go. what size size lines

Randy, ask on the race forum, I had a filter attachment to run the oil cooler on my A drag bike but can't remember who supplied it.
 It might have been Terry in Australia but I'm not sure.
Here's a pic.

Sam.

[Randy Nevrotski]

thanks for the reply sam . my stock pipes are in the way . i will put a pic when i can. ran into a real problem . im going to post now

[Randy Nevrotski]

they talk about how slow hondamadic are . my bike runs good ,its fast for what it is , i have the carbs almost dialed in . got rid of the points. i had it at 101 MPH on a windy night . my gps . MAX SPEED 101 MPH and bike had a little bit more but i had to get off exit.  that's why i want oil cooler so i do over heat torque converter