Author Topic: spark units  (Read 836 times)

0 Members and 1 Guest are viewing this topic.

Offline zoccolocco

  • Full Member
  • *
  • Posts: 3
spark units
« on: October 20, 2020, 10:26:53 am »
I dont know where to connect these five wires.

Can someone give me some advice

Offline jgger

  • Master
  • *****
  • Posts: 2,164
Re: spark units
« Reply #1 on: October 21, 2020, 12:09:41 am »
From what I see in the 80-81 650 diagram in the technical articles here. (Which you can download). As follows

White=pulse generator
Blue= pulse generator
Green= ground
Black= ignition power (from kill switch)
Yellow= ignition coil

The blue wire may jump color at the connector plug on one of the igniters.
"The SOHC4 uses a computer located about 2-3 ft above the seat.  Those sometimes need additional programming." -stolen from  Two Tired

The difference between an ass kisser and brown noser is merely depth perception.  Stolen from RAFster122s

Offline zoccolocco

  • Full Member
  • *
  • Posts: 3
Re: spark units
« Reply #2 on: October 21, 2020, 04:02:45 am »
 :)

Thanks a lot.