Author Topic: Damn Internet Costs Me AGAIN! (Read 9445 times)

Terry in Australia · « **Reply #25 on:** December 16, 2020, 08:15:48 PM »

Thanks mate, I’ll be interested in seeing what treasures you dig up!

RAFster122s · « **Reply #26 on:** December 17, 2020, 01:11:51 AM »

Would love to know what he has in CB550 parts or CB500 parts. I have a '74 CB550(K0).

BenelliSEI · « **Reply #27 on:** December 17, 2020, 06:55:46 AM »

RAF.....Will ask today.

RAFster122s · « **Reply #28 on:** December 17, 2020, 12:35:06 PM »

Hey Benelli, send me an email or PM I found something you may want to grab a couple of...if part is right you will want them...
Yeah, I am building anticipation!
David

P.S.
Btw, thanks for asking!
It is a cb650 part, may have confused ypu with anither member...

Don R · « **Reply #29 on:** December 17, 2020, 01:08:20 PM »

I met a guy that bought out a lot of old shop stock. He lost a barn full in a divorce, had to sell it at auction. He was years ahead of the curve but quit doing it years ago. I had recently retired to do a job that vaporized and didn't know if I could afford to go to the sale. I should have found out about his stash sooner.

BenelliSEI · « **Reply #30 on:** December 17, 2020, 05:10:59 PM »

First part of what I got today..... both are absolutely new, perfect, unmarked, Honda bags and boxes.
1971 Speedometer.
1973-75 Speedometer.

BenelliSEI · « **Reply #31 on:** December 17, 2020, 05:13:00 PM »

Photo #2. New, in the bags, unmarked. Two small tail light bases, one large.

BenelliSEI · « **Reply #32 on:** December 17, 2020, 05:16:48 PM »

Photo #3. Again, new, in the bags. LHS bar switch, K3-K5. Most amazing: RHS bar switch, 35300-300-672, 1969-70 “blk.top” Honda part!

BenelliSEI · « **Reply #33 on:** December 17, 2020, 05:19:19 PM »

Photo #3. New, starter motor control unit, K3-K6 tank badges, and cam chain wheel!

BenelliSEI · « **Reply #34 on:** December 17, 2020, 05:27:35 PM »

Photos #4 & 5. The rest is “smalls”, but perfect condition. Includes, 3Xfuse box, rotor bolt, kick starter spring, oil orfice controls, CT70 headlamps sockets, rear turn signal bases, “rocker arm B”, Rod bearlings centre shift fork, geardrum/spindle roller, stopper spring, 400F con rod bolts (5?), filler cap pin, GL1000 starter sprocket (2), and 1979-82 cb750-900F brake pedal spring!

Not planning to sell anything, but if you see something you desperately need, pm me.

Terry in Australia · « **Reply #35 on:** December 17, 2020, 05:28:02 PM »

Wow, now there's some treasure! There's a guy on Ebay trying to sell a RHS K0 handlebar switch (used, but in very nice condition) for $300.00 USD, I honestly thought about buying it for my K0, but the Yamiya switches are such good replicas I decided against it, but that there has gotta be worth $500 USD to the right buyer?

Same/same for the gauges, especially the K1 speedo, that's rarer than rocking horse manure! Somehow I've got a new old stock tail light that I didn't use on my K0 so it'll go on my K1 build, I'm not sure if they're that rare because they used them on lots of models, but still a good find, for sure. Well done mate, I hope you can either use them on one of your builds, or make some money out of them!

BenelliSEI · « **Reply #36 on:** December 17, 2020, 05:51:31 PM »

Terry..... sent you a PM.

Raff and 754....... asked about your queries, PM’s sent.

Prospect · « **Reply #37 on:** December 17, 2020, 05:51:54 PM »

Nice score. There is a guy on Kijiji -local- selling a new k1 tach to complement your find. He wants $600

BenelliSEI · « **Reply #38 on:** December 17, 2020, 05:54:42 PM »

Prospect..... Jeez. I used to buy entire bikes for $1200! I may just have to look. Ouch.

PeWe · « **Reply #39 on:** December 18, 2020, 12:04:35 AM »

K1 cost more due to the small production, right?
But less bikes to be restored..

K2 was produced 1972-75 for Europe.

ekpent · « **Reply #40 on:** December 18, 2020, 05:28:15 AM »

Quote from: PeWe on December 18, 2020, 12:04:35 AM

K1 cost more due to the small production, right?
But less bikes to be restored..

K2 was produced 1972-75 for Europe.

The K1 had the largest production volume of units then any other year. If I remember I think it was like 77,000 but sure I can be corrected. They were pumpin' em out big time that year to meet demand.

lash · « **Reply #41 on:** December 18, 2020, 05:34:43 AM »

John, it never ceases to amaze me how you manage to luck into these finds!

ekpent · « **Reply #42 on:** December 18, 2020, 05:46:13 AM »

Quote from: lash on December 18, 2020, 05:34:43 AM

John, it never ceases to amaze me how you manage to luck into these finds!

Not luck as much the fact that he is a good 'hunter'.

BenelliSEI · « **Reply #43 on:** December 18, 2020, 07:22:11 AM »

Quote from: ekpent on December 18, 2020, 05:46:13 AM

Quote from: lash on December 18, 2020, 05:34:43 AM
John, it never ceases to amaze me how you manage to luck into these finds!
Not luck as much the fact that he is a good 'hunter'.

That’s it...... going to give it a rest!

Don R · « **Reply #44 on:** December 18, 2020, 08:10:30 AM »

I used to buy K1 gauges reasonable on ebay when my K0 had them on it. I'll need to have a look and see what's in the box. I made a ring prying fixture out of oak to work on them. When I found K0 gauges that I could afford I almost fainted. A speedo from the Sandcast site and a tach from a generous guy on here. I got a pair of covers from ebay and ended up with enough to supply the poo brown K0 I got last year.

BenelliSEI · « **Reply #45 on:** December 18, 2020, 08:34:18 AM »

I think the most interesting part is the “black top” RHS bar switch. These have not been available for years. I compared it to the Yamiya switch on my K0 and there are very subtle differences (not enough to warrant a swap). I wonder what it’s really worth? May put it on EBay just for fun!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #46 on:** December 18, 2020, 08:52:09 AM »

Compare it to JTMarks stuff. If it were me I'd start at $500 or set the reserve at $500

lash · « **Reply #47 on:** December 18, 2020, 08:54:22 AM »

How about $10 and a Blackberry? Oh wait, this isnt kijiji!

754 · « **Reply #48 on:** December 18, 2020, 09:47:13 AM »

500 ! That's all I paid for my Sandcast and it had , black switch, good guages, long choke, lefty horn, 28 carbs...etc..

RAFster122s · « **Reply #49 on:** December 18, 2020, 01:00:39 PM »

Frank,how many years ago was that sandcast purchase?

News:

Author Topic: Damn Internet Costs Me AGAIN! (Read 9445 times)