Topic: frame tags

[D DIAMOND]

hello did the early uk cb750 1970-76 have frame tags on the head stock or just the stamp on the frame if so can i get a replacement tag
thanks DD

[PeWe]

I ordered a new from this seller. Stamped the frame number and attached it on frame. The frame should have 2 holes for it.

https://www.ebay.com/itm/Honda-CB-750-Four-K0-K1-K2-K6-Frame-Plate-Registered-Type-Identification-2-/293498377376

This is how it looked like here in Europe.

[PeWe]

One more
https://www.ebay.com/itm/Honda-CB-750-four-K0-K6-Nameplate-Aluminium-VIN-Type-Plate-Registered-Aluminum-/164129690901?_trksid=p2349624.m46890.l49292

[D DIAMOND]

thanks pewe thats great do they stamp the numbers or do you stamp yourself
thanks DD

[bryanj]

UK bikes did not have tags or vin plates till 77 maybe 78 depending on model so you dont need one.
And if you do buy one no they dont stamp them, one seller will print the number others just leave it blank

[Nurse Julie]

None fitted to any UK model 750/4 K0-K6 inclusive.

[D DIAMOND]

THANKS NURSE JULIE ITS A 1972 PANICK OVER
    DD,PS (GOT YOUR PRIVATE MESSAGE)

[Nurse Julie]

THANKS NURSE JULIE ITS A 1972 PANICK OVER
    DD,PS (GOT YOUR PRIVATE MESSAGE)

That's good, obviously if it's a USA import that is now in the UK, it would have had a VIN tag. It was only the UK models that didn't have them fitted, I'm not sure if the mainland Europe 750's have them fitted or not.
Edit, if yours is a K4 it's a USA model as we never had k3/4/5 in the UK model range, so yours should have a tag 😊

[PeWe]

Swedish bikes got this plate on frame, right side close to horn.  At least K2 and K6. (1972-1977)

The plate to purchase must be stamped by yourself.

I found rather good sized stamps at my job. Not exactly same style as Honda.

I'll stamp not that hard next time.
I ordered 2 for my K2 build which was perfect since I have bought another K2 frame in need of a better looking plate. Stock plate is really dented and scratched

[lash]

This company in Switzerland , look up Khneisser ,does perfect repros of any year honda and they will print your serial number as shown.

[PeWe]

Here the original plate I'll replace. See horn bracket above the plate.

[RAFster122s]

This company in Switzerland , look up Khneisser ,does perfect repros of any year honda and they will print your serial number as shown.

Where do you get those plates? My CX500 has a section of its plate missing from wear on cables chafing against it...crazy to see that.

[lash]

Company is called Khneisser in Switzerland. I have had 4 or 5 tags made, all top guality.

[D DIAMOND]

hello my 1972 k 2 is a uk model registered  23/03 1972 so no tag is that correct
DD

[Don R]

 Use them, I accidentally ordered from another vendor.  It came and is a beautiful sticker. I got 3 in the order, tried one on the frame and left it. I did stick one to an aluminum plate but haven't messed with it further.   

[BenelliSEI]

Company is called Khneisser in Switzerland. I have had 4 or 5 tags made, all top guality.

Lash suggested this company to me. I’ve ordered two and they were superb. They also make others. I’m pretty sure the one on my Benelli 750 SEI came from them too.

[RAFster122s]

Company is called Khneisser in Switzerland. I have had 4 or 5 tags made, all top guality.

Thank you very much!

Merry Christmas all...

David