Author Topic: Our next build - Project Rabia (Read 2073 times)

ElCheapo · « **on:** February 20, 2007, 01:18:17 PM »

Scored this 77 750 K for $575. Yes it runs, just not well. I will post back progress as it comes along. Yes I know I always teased the later model riders. Now I will become one.

Way too darned low!!

The culprit

SD750F · « **Reply #1 on:** February 20, 2007, 02:31:30 PM »

Thomas,

Looks great! Maybe I will see you riding your updated new bike at this year's Slimey Crud Run May 1st???

Scott

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2 on:** February 20, 2007, 03:00:16 PM »

Wow - a modern bike this time AND in 1 piece AND a CBX to boot!

Looks like you have a great staring point. Looks like you got a good deal.

Einyodeler · « **Reply #3 on:** February 20, 2007, 03:36:11 PM »

Hey Tom
Looks like a great bike for the $. I`ll bet it turns into a corner real fast with that "custom" front end and there must not have been any speed bumps in the area

You can probably get some good $ for that sidecover too. Great score, I`ll be staying tuned for the build

You`ll have to ride it down to the Mods & Rockers event.

ElCheapo · « **Reply #4 on:** February 20, 2007, 05:00:11 PM »

Quote from: SD750F on February 20, 2007, 02:31:30 PM

Thomas,

Looks great! Maybe I will see you riding your updated new bike at this year's Slimey Crud Run May 1st???

Scott

It will be long gone by then I am sure.

But I will be using the revenue from it to build the one I am keeping.

Jonesy · « **Reply #5 on:** February 21, 2007, 11:47:10 AM »

You gonna do all of HondaMan's 550 soop-up mods?

ProTeal55 · « **Reply #6 on:** February 21, 2007, 12:12:08 PM »

So what's this one gonna be ?
Cafe - Streetfighter - Hooligan - tracker ?

Uncle Ernie · « **Reply #7 on:** February 21, 2007, 01:10:32 PM »

What does "Rabia" mean?

Einyodeler · « **Reply #8 on:** February 21, 2007, 06:02:31 PM »

Quote from: Uncle Ernie on February 21, 2007, 01:10:32 PM

What does "Rabia" mean?

It`s Arabic, means "the fourth female"

hopterfixer · « **Reply #9 on:** February 21, 2007, 07:52:00 PM »

Quote from: Einyodeler on February 21, 2007, 06:02:31 PM

Quote from: Uncle Ernie on February 21, 2007, 01:10:32 PM
What does "Rabia" mean?

It`s Arabic, means "the fourth female"

I thought it was poor Japanese for a part of a woman's anatomy...

ElCheapo · « **Reply #10 on:** February 22, 2007, 12:29:51 PM »

In spanish the tranlation is Rage...

It will be a cafe fighter cross.

chung · « **Reply #11 on:** February 22, 2007, 08:30:17 PM »

Cool a crossdresser. So you can sell me the gas tank?

One of my fav tanks. Damn.... did I sy that out loud

ElCheapo · « **Reply #12 on:** February 23, 2007, 11:20:47 AM »

Quote from: chung on February 22, 2007, 08:30:17 PM

Cool a crossdresser. So you can sell me the gas tank?

One of my fav tanks. Damn.... did I sy that out loud

Nope I keeping the tank. Has about 3 dents to address (doing that tonight). I dont really like the tank, but it work well with overall theme. And yes I am using another H1 tail section on this one. Basically this will be like Home Wrecker but no fairing and lots of extra details.

my78k · « **Reply #13 on:** February 23, 2007, 11:59:33 AM »

"I thought it was poor Japanese for a part of a woman's anatomy... "

LMAO!!!!!! That is the funnies GD thing I ahve heard in a long time! Just made a bunch of guys turn around in my office when they heard me laugh out loud!!

Dennis

mlinder · « **Reply #14 on:** February 23, 2007, 01:54:43 PM »

Quote from: my78k on February 23, 2007, 11:59:33 AM

"I thought it was poor Japanese for a part of a woman's anatomy... "

LMAO!!!!!! That is the funnies GD thing I ahve heard in a long time! Just made a bunch of guys turn around in my office when they heard me laugh out loud!!

Dennis

http://www.rahoi.com/2006/03/may-i-take-your-order.php

ElCheapo · « **Reply #15 on:** February 23, 2007, 05:22:24 PM »

Tonights progress. I will let the pictures speak. Right now we are in mock up.

ElCheapo · « **Reply #16 on:** February 28, 2007, 06:26:35 AM »

Last night started into the carbs, while they were clean they leaked like a sin and after about 3 times in them I gave up and opted to use a set of carbs that a customer had returned. To prove a point we installed them straight out of the box he returned them in. They ran but not so great. After some time with the ultrsonic cleaner we had clean carbs. The bowls had some carmelized gas in the bottom but the cleaner made short order of this problem.

If you dont have one of these, get one. When we were done the carb bits looked like brand new.

ProTeal55 · « **Reply #17 on:** February 28, 2007, 06:50:09 AM »

Quote from: ElCheapo on February 28, 2007, 06:26:35 AM

After some time with the ultrasonic cleaner we had clean carbs. The bowls had some caramelized gas in the bottom but the cleaner made short order of this problem.

If you don't have one of these, get one. When we were done the carb bits looked like brand new.

Look at you with the fancy machines

medic09 · « **Reply #18 on:** February 28, 2007, 07:31:57 AM »

I don't need no stinkin' machines. Real men soak and spray and scrape and scrub. And have cracked, bleeding skin to prove it!

(good thing the wife does toxicology. I may need that down the road...

)

So Tom, what does a contraption like that cleaner cost ya?

ElCheapo · « **Reply #19 on:** February 28, 2007, 03:08:51 PM »

Quote from: medic09 on February 28, 2007, 07:31:57 AM

I don't need no stinkin' machines. Real men soak and spray and scrape and scrub. And have cracked, bleeding skin to prove it!

(good thing the wife does toxicology. I may need that down the road... )

So Tom, what does a contraption like that cleaner cost ya?

It ran me about $60 at Harbor Freight. And was worth every penny. It is a bit small, but it works just fine. One carb body at a time.

Quote from: ProTeal55 on February 28, 2007, 06:50:09 AM

Quote from: ElCheapo on February 28, 2007, 06:26:35 AM
After some time with the ultrasonic cleaner we had clean carbs. The bowls had some caramelized gas in the bottom but the cleaner made short order of this problem.

If you don't have one of these, get one. When we were done the carb bits looked like brand new.
Look at you with the fancy machines

Not to fancy, just good sense

medic09 · « **Reply #20 on:** February 28, 2007, 03:50:16 PM »

I'm convinced. It's a shame I haven't any more bikes to rebuild carbs on for now...

Thanks.

News:

Author Topic: Our next build - Project Rabia (Read 2073 times)