Author Topic: Custom Wiring Harness  (Read 2793 times)

0 Members and 1 Guest are viewing this topic.

Offline GanjarDanks

  • Full Member
  • *
  • Posts: 15
Custom Wiring Harness
« on: May 27, 2019, 08:08:49 AM »
Hey guys, Hope you're all having an awesome Memorial Day Weekend!

I need a little assistance with the 78 cb550k that I've been building. I'm finally at the point where I can start wiring my bike, I recently picked up a Rectifier/Regulator. There are 8 wires in total. The first bundle constists of three yellow lines (AC) mount to the stator, ground(Green) mounts to ground (Green on Stator), and a red wire. Which I am assuming mounts to white off the stator???

Second bundle consist of 3 wires: White, Black and Green. I have no idea where any of these mount If you guys could dop any info it would be appreciated.

Here's the wiring Diagram I have been using as a reference in building my own harness


Here's a link to the unit i purchased. For a better visual.
 


https://www.amazon.com/gp/product/B0767XFWNG/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

Any help would be appreciated.


Offline calj737

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 21,070
  • I refuse...
Re: Custom Wiring Harness
« Reply #1 on: May 27, 2019, 10:32:52 AM »
Try this one instead.
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline CluGuySam

  • Full Member
  • *
  • Posts: 8
Re: Custom Wiring Harness
« Reply #2 on: July 05, 2019, 07:06:01 PM »
if using a stock harness to start from the B,G,W will connect into the spade connectors from the original regulator. try this diagram,  http://manuals.sohc4.net/cb500/service_manual/HSM500550_11.pdf

Offline cbCaferacer

  • Full Member
  • *
  • Posts: 2
Re: Custom Wiring Harness
« Reply #3 on: October 31, 2019, 05:23:06 PM »
30a fuse? i thought it was suppposed to be a 15a

Offline randomguy81

  • Full Member
  • *
  • Posts: 23
Re: Custom Wiring Harness
« Reply #4 on: February 07, 2022, 08:10:44 PM »
Try this one instead.

Is there any reason this can't be applied to a CB650 build?

Also is there a key for the diagram (sorry just new to this) - to explain what the H M G etc mean?

Offline calj737

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 21,070
  • I refuse...
Re: Custom Wiring Harness
« Reply #5 on: February 07, 2022, 08:47:27 PM »
Try this one instead.

Is there any reason this can't be applied to a CB650 build?

Also is there a key for the diagram (sorry just new to this) - to explain what the H M G etc mean?
Well, the 650 uses a CDI ignition, so it’s a bit different where the “coils” are concerned. And, depending upon the ignition, you may need an additional component from MotoGadget to interface that to the mUnit.

H - Horn
G - Generator (also called a Stator on our bikes)
M - Starter motor (the electric thing that makes the bike fire up  ;) )
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline randomguy81

  • Full Member
  • *
  • Posts: 23
Re: Custom Wiring Harness
« Reply #6 on: February 08, 2022, 06:47:28 AM »
Ha! Thank you for the basics there - I was sitting here late at night trying to figure out the meanings of the letters and my mind just couldn't figure it out.