Author Topic: swingarm  (Read 115 times)

0 Members and 1 Guest are viewing this topic.

Offline Randy Nevrotski

  • Randy
  • Full Member
  • *
  • Posts: 32
« on: January 17, 2021, 08:39:50 am »
What aluminum swing arm will bolt up /line up the easiest  without modify CB750A Frame Also what front end will work. I cant find where i saw it I believe i could use a Katana swingarm and a GSXR front end is that correct . what years parts would work or what could i use . I want maching rims . its just an idea I'm looking into.  on a rear disk brakes could i put a hand leaver for that because 750A doesn't have anything on left side handle bar side
1976 CB750A & Other bikes 1980 KZ 650 cafe racer 87 ZX750R NINJA 2001 KATANA 600 1983 GPz 750 1980 CB750 CUSTOM Past bikes 1974 suzuki GT750 TRIPLE Care Free Custom chopper 117 motor 95 Honda XR650L Dual Sport 87 ZX600R NINJA Honda CB550FOUR 87 Yamaha 225 trike honda 250R trike RM80 HONDA TRAIL CT70

Offline ebrown0104

  • Full Member
  • *
  • Posts: 18
Re: swingarm
« Reply #1 on: January 19, 2021, 05:57:07 pm » can make you a set of triple trees for just about any front end.  You just tell them what you have and give them a bunch of money.  For rear disc brakes you can use an F model rear master cylinder assembly, just remember you'll lose the parking brake